Diaqua WC Seat Nut Driver – M6 Socket Tool with Ratchet Adapter (Deep Socket / Pass-Through)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A durable, elongated M6 nut driver designed for use with Diaqua toilet seat assemblies. This tool features a 10 mm hex
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 21
- Makes
- 0
- Views
- 76
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
A durable, elongated M6 nut driver designed for use with Diaqua toilet seat assemblies.
This tool features a 10 mm hex socket (to fit standard M6 nuts) at the top, and a female ¼-inch square hole at the bottom – allowing it to be operated with a standard ¼" ratchet.
The internal shaft is fully hollow (⌀ 6.2 mm), so long screws can pass through during tightening – perfect for installations where nuts are recessed or bolts are extra long.
This tool was created specifically for Diaqua WC seats, where original tools often break or go missing.
🧾 Print Settings
Material: ASA (moisture and heat resistant – perfect for bathrooms)
Infill: 15%
Walls/Perimeters: 3
Layer Height: 0.2 mm
Supports: Not needed
Brim: Recommended when printing with ASA
🔧 Use Case
Fits M6 nuts (10 mm hex)
Designed for Diaqua toilet seats
Bottom side accepts ¼" ratchet drive (square male connector)
Fully hollow tool shaft – allows screws to pass through