1 / 5
Oil seal driver for TC 40x50x5 seal — zdjęcie 1
1 / 5

Oil seal driver for TC 40x50x5 seal

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Oil seal driver for TC 40x50x5 seal used in speed sensor of Aveta Ranger Max Explorer

Ocena
0 / 5
Polubienia
0
Pobrania
10
Wydruki
0
Wyświetlenia
71
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Share Alike

Oil seal driver for TC 40x50x5 seal used in speed sensor of Aveta Ranger Max Explorer (Malaysian market) / G-Moto Cross X Pro (Russian market).

It uses stock axle as guide rail and has a notch for speed sensor rotor.
Seal should be fitted using following steps:

  • thoroughly clean seal seat;
  • install lubricated speed sensor rotor in it's notches in the wheel hub;
  • put the seal onto it's seat, put the driver on top of seal, and put the axle right through the driver and both wheel bearings;
  • rest axle head on driver, driver on seal;
  • check whether seal is centered in it's seat;
  • hold the wheel in your arm, do not place it anywhere - seal should be fitted using wheel inertia to avoid excessive forces on seal;
  • slightly tap the axle head with hammer multiple times until you hear that tapping sound became dull;
  • oil the seal lips with appropriate amount of lithium soap grease;
  • seal fitment is done. :-)

Tagi