1 / 5
Oil seal driver for TC 40x50x5 seal — image 1
1 / 5

Oil seal driver for TC 40x50x5 seal

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Oil seal driver for TC 40x50x5 seal used in speed sensor of Aveta Ranger Max Explorer

Rating
0 / 5
Likes
0
Downloads
10
Makes
0
Views
71
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Share Alike

Oil seal driver for TC 40x50x5 seal used in speed sensor of Aveta Ranger Max Explorer (Malaysian market) / G-Moto Cross X Pro (Russian market).

It uses stock axle as guide rail and has a notch for speed sensor rotor.
Seal should be fitted using following steps:

  • thoroughly clean seal seat;
  • install lubricated speed sensor rotor in it's notches in the wheel hub;
  • put the seal onto it's seat, put the driver on top of seal, and put the axle right through the driver and both wheel bearings;
  • rest axle head on driver, driver on seal;
  • check whether seal is centered in it's seat;
  • hold the wheel in your arm, do not place it anywhere - seal should be fitted using wheel inertia to avoid excessive forces on seal;
  • slightly tap the axle head with hammer multiple times until you hear that tapping sound became dull;
  • oil the seal lips with appropriate amount of lithium soap grease;
  • seal fitment is done. :-)

Tags