Beer can pinhole camera mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I've been experimenting with pinhole photography, and I wanted to mount my pinholes on a tripod.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 197
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Public Domain
I've been experimenting with pinhole photography, and I wanted to mount my pinholes on a tripod. I found that the standard tripod screw mount is ¼"-20 UNC, so that is what I used. I have made a bunch of different cameras from different things including a ramen container, until I saw something in my own hand. I created a cap for the can at 66mm, and if you have a dark bag, you can change out your ‘film’ and shoot over and over. There is a great pinhole camera calculator here that I used to figure out pinhole diameters etc.
I opened the can with a normal can opener to reveal a rounded over 52mm aperture.
NB, I would paint the cap on the inside with black paint, as my filament was translucent when printed.