Beer can pinhole camera mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I've been experimenting with pinhole photography, and I wanted to mount my pinholes on a tripod.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 9
- Makes
- 0
- Views
- 197
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Public Domain
I've been experimenting with pinhole photography, and I wanted to mount my pinholes on a tripod. I found that the standard tripod screw mount is ¼"-20 UNC, so that is what I used. I have made a bunch of different cameras from different things including a ramen container, until I saw something in my own hand. I created a cap for the can at 66mm, and if you have a dark bag, you can change out your ‘film’ and shoot over and over. There is a great pinhole camera calculator here that I used to figure out pinhole diameters etc.
I opened the can with a normal can opener to reveal a rounded over 52mm aperture.
NB, I would paint the cap on the inside with black paint, as my filament was translucent when printed.