Unresponsive 3d Printed Yo-yo | The Best One Out There

A (mostly) 3d printed yoyo with superior fingerspin capabilities. Everything is 3d printed except for 1 m4 nut, 1 m4x20 hex bolt, 1 c yo-yo bearing, magicyoyo yellow response pads, and the yo-yo string.

Recommended Print Settings: 

Print in PLA (PETG may also work to make it stronger)

100% Infill (to make the yo-yo weigh the correct amount), but can be modified to make the yo-yo lighter. 

No bed adhesion 

Supports only for the hex hole in the center of the yo-yo

0.1-0.2 layer height.

Parts to purchase

m4 nut (1)

m4x20 hex head bolt (1)

c yo-yo bearing (1)

magicyoyo response pads (1 pair)

yo-yo string (1)

yo-yo parts- https://www.amazon.com/MAGICYOYO-Responsive-YoYo-Bearing-Removal/dp/B07MVRSC55/ref=sr_1_1_sspa?crid=72A4R01OU1FL&dib=eyJ2IjoiMSJ9.jU-LfQMqeZDuocfWGKnuu1d1neE-Gk3O1nouru0KogwI8aNR7t2Jqr_o-HCic5kfqXAeSNN3cCv6KZlsn1RM6e30e3M98NDHihlMVC0ZsiY6YpfGfS6Qv8XIKkEQ4eZjWEuyE6d4WYpKjUl12JtMw_SX21HIfRbe5GOKN1nlg1K-51PKQUSuFYpKIP9qXJHIVrnD0SIQkmbVu_bncElU8awBimndt1sG75At83OM1OJxt4WjCtfXZO7BcytRP5JEsFUCD1C85-vZbjCFhYk5GcNaOSEUNBvYZ1Gr4lkFJvU.rldu3OXxKKf4egQhgCaT_BqOVQ1dCHdLyQC9fur_xr4&dib_tag=se&keywords=magicyoyo+parts&qid=1750188535&sprefix=magicyoyo+par%2Caps%2C230&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1

Assembly- 

1. Place the response pads in the donut-shaped recession in each yo-yo half, and press them down with a credit card.
2. Insert the hex bolt through the outside of the yo-yo inwards (through one half)
3. Place the bearing on the yo-yo half with the hex bolt. 
4. Untwist the string and put it on the bearing.
5. Place the other yo-yo half through the bolt (should be on top of the bearing)
6. Place the m4 nut into the other yo-yo half and screw the two halves together.