Unresponsive 3d Printed Yo-yo | The Best One Out There
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A (mostly) 3d printed yoyo with superior fingerspin capabilities.
- Rating
- 0 / 5
- Likes
- 0
- Makes
- 0
- Views
- 287
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Standard Digital File License
A (mostly) 3d printed yoyo with superior fingerspin capabilities. Everything is 3d printed except for 1 m4 nut, 1 m4x20 hex bolt, 1 c yo-yo bearing, magicyoyo yellow response pads, and the yo-yo string.
Recommended Print Settings:
Print in PLA (PETG may also work to make it stronger)
100% Infill (to make the yo-yo weigh the correct amount), but can be modified to make the yo-yo lighter.
No bed adhesion
Supports only for the hex hole in the center of the yo-yo
0.1-0.2 layer height.
Parts to purchase
m4 nut (1)
m4x20 hex head bolt (1)
c yo-yo bearing (1)
magicyoyo response pads (1 pair)
yo-yo string (1)
Assembly-
- Place the response pads in the donut-shaped recession in each yo-yo half, and press them down with a credit card.
- Insert the hex bolt through the outside of the yo-yo inwards (through one half)
- Place the bearing on the yo-yo half with the hex bolt.
- Untwist the string and put it on the bearing.
- Place the other yo-yo half through the bolt (should be on top of the bearing)
- Place the m4 nut into the other yo-yo half and screw the two halves together.
