Fallout Keycard with insert for card/door pass
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fallout keycard includes an insert so a standard credit card or door pass can be utilised and used with a lanyard
- Ocena
- 0 / 5
- Polubienia
- 32
- Pobrania
- 89
- Wydruki
- 0
- Wyświetlenia
- 529
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Based on my Fallout keycard design, I have remodelled the design to now include an insert so a standard credit card or door pass can be utilised. There is a hole near the top to prevent the card falling out but to also allow it to be attached to a keychain or laynard.
The large round circle with the Vault-Tec logo makes it easy to remove the card from the slot.
I have also included a file with a cutover should you have a picture that needs showing.
Instructions
(see images for guidance)
- Print both halves with text facing down towards the bed.
- Add strong superglue to the notches along the side of the inside card.
- Align both halves to ensure notches connect and snap into place.
- Press both halves together for 30-60 seconds to ensure strong hold.
- Insert a standard credit card or door pass into the slot.
- To prevent the card from falling out, use a keychain by attaching to the hole provided or attach to a laynard.
- Enjoy!