1 / 9
Fallout Keycard with insert for card/door pass
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fallout keycard includes an insert so a standard credit card or door pass can be utilised and used with a lanyard
- Rating
- 0 / 5
- Likes
- 33
- Downloads
- 89
- Makes
- 0
- Views
- 532
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Based on my Fallout keycard design, I have remodelled the design to now include an insert so a standard credit card or door pass can be utilised. There is a hole near the top to prevent the card falling out but to also allow it to be attached to a keychain or laynard.
The large round circle with the Vault-Tec logo makes it easy to remove the card from the slot.
I have also included a file with a cutover should you have a picture that needs showing.
Instructions
(see images for guidance)
- Print both halves with text facing down towards the bed.
- Add strong superglue to the notches along the side of the inside card.
- Align both halves to ensure notches connect and snap into place.
- Press both halves together for 30-60 seconds to ensure strong hold.
- Insert a standard credit card or door pass into the slot.
- To prevent the card from falling out, use a keychain by attaching to the hole provided or attach to a laynard.
- Enjoy!