Organic EV Charger/Hose Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Loop your EV charger chord or hose over this organic topologically optimized holder.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 251
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution
Recommend printing in PETG or other UV resistant filament if mounted in/near sunlight. The shape is very strong, so you can get away with very little infill/shells. I did two layers for bottom top and shell and 5% infill and no support. I included a few tiny holes to act as virtual threads as well to support some features if the infill is too sparse to support them.
Made with fusion 360 generative design/topology optimization. I flattened out the bottom for better printing, and included the fusion and step files for if you'd like to modify the screw holes or something. I made it to work with #4-6 screws.