Organic EV Charger/Hose Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Loop your EV charger chord or hose over this organic topologically optimized holder.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 33
- Makes
- 0
- Views
- 251
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution
Recommend printing in PETG or other UV resistant filament if mounted in/near sunlight. The shape is very strong, so you can get away with very little infill/shells. I did two layers for bottom top and shell and 5% infill and no support. I included a few tiny holes to act as virtual threads as well to support some features if the infill is too sparse to support them.
Made with fusion 360 generative design/topology optimization. I flattened out the bottom for better printing, and included the fusion and step files for if you'd like to modify the screw holes or something. I made it to work with #4-6 screws.