MMU 4in1 hub
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
4in1 hub to get mounted into the top lid of the enclosure.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 276
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Upgrade for user with an enclosed printer who dont want to pull 4 PTFE from the hub towards the extruder.
This version needs to get mounted into the top lid of your enclosure.
This enables you to just have one single PTFE towards the extruder, which needs to get any sort of filament sensor as provided already by the community of the PICO MMU by @LH.
As the distance from the HUB to the extruder, you really need some sort of filament buffer (I use the Stern-Wheeler) and you should think about a cutter mounted between extruder and hotend.
Print at least in PETG or better in ABS.
Layer hight: 0.1 to 0.12