1 / 2
Parabolic LNB dish for radio amateurs — zdjęcie 1
1 / 2

Parabolic LNB dish for radio amateurs

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Basic dish with stand for an LNB

Ocena
0 / 5
Polubienia
8
Pobrania
81
Wydruki
0
Wyświetlenia
511
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution

This is a basic dish I made for a colleague, it has an F/D of 0.8 and was made to use be used with a DSTV LNB but others should also work with similar diameters. 

Once all is printed the 8 Dish parts needs to be bolted together using M4 nuts and bolts and coated with a metallic substance, aluminum tape works great. I have seen some success on the internet with certain spray paints.

The gap made for the arm is a bit on the small side but I lost access to the design files so I cannot update that atm. I will reupload once I can.

This can be printed on most printers except for the arms which will require splitting or a 300mm bed, I will upload split arms when possible.

For a 60-degree elevation, to communicate with the QO-100 geostationary satellite in South Africa, use mount the base using the holes as shown below.

Tagi