Parabolic LNB dish for radio amateurs
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Basic dish with stand for an LNB
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 81
- Makes
- 0
- Views
- 522
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
This is a basic dish I made for a colleague, it has an F/D of 0.8 and was made to use be used with a DSTV LNB but others should also work with similar diameters.
Once all is printed the 8 Dish parts needs to be bolted together using M4 nuts and bolts and coated with a metallic substance, aluminum tape works great. I have seen some success on the internet with certain spray paints.
The gap made for the arm is a bit on the small side but I lost access to the design files so I cannot update that atm. I will reupload once I can.
This can be printed on most printers except for the arms which will require splitting or a 300mm bed, I will upload split arms when possible.
For a 60-degree elevation, to communicate with the QO-100 geostationary satellite in South Africa, use mount the base using the holes as shown below.

