Citrus juicer “Boaty”

Would you like to support my work? :)
Check out my  full catalog with exclusives, early access and commercial licences.
— 

A boaty-looking citrus juicer with two spouts. One with a separator for seeds and pulp and one without.

The spouts serve as a handle during the pressing process. Great for Oranges, Lemons, and Limes.

Size:  130 x 164 x 64mm

This is the V3

Print settings

Only use certified food save material to print this product. Foodsafe and dishwasher safe PLA is the optimal material for this design.

Required build volume: 130 x 164 x 64mm

Material usage: 60g

Print time: 6h

Material: Food safe filament

Print direction: stls are rotated correctly, check images

Support: none

Nozzle size: 0,4 mm

Line width: 0,4 mm

Layer height 0,2 mm – 0.28mm

Outer walls: 3

Infill: 20%

Build plate adhesion type: none

Watertight printing - If you have a well set up machine it comes automatically - Otherwise here are some tips: Increase your wall count (at least 3), level your bed nicely, decrease print speed, increase layer height (at least 0.2mm), check your seam quality, calibrate your e-steps and fine tune your retraction settings to make sure no holes appear after a layer change.