Citrus juicer “Boaty”
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A boaty-looking citrus juicer with two spouts. One with a separator for seeds and pulp and one without.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 30
- Makes
- 0
- Views
- 168
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Standard Digital File License
Would you like to support my work? :)
Check out my full catalog with exclusives, early access and commercial licences.
—
A boaty-looking citrus juicer with two spouts. One with a separator for seeds and pulp and one without.
The spouts serve as a handle during the pressing process. Great for Oranges, Lemons, and Limes.
Size: 130 x 164 x 64mm
This is the V3
Print settings
Only use certified food save material to print this product. Foodsafe and dishwasher safe PLA is the optimal material for this design.
Required build volume: 130 x 164 x 64mm
Material usage: 60g
Print time: 6h
Material: Food safe filament
Print direction: stls are rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm – 0.28mm
Outer walls: 3
Infill: 20%
Build plate adhesion type: none
Watertight printing - If you have a well set up machine it comes automatically - Otherwise here are some tips: Increase your wall count (at least 3), level your bed nicely, decrease print speed, increase layer height (at least 0.2mm), check your seam quality, calibrate your e-steps and fine tune your retraction settings to make sure no holes appear after a layer change.