Slim Silakka54 screwless case for Aliexpress keyboards
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The excellent slim case slightly modified to fit the slightly bigger PCB sold by some Aliexpress vendors.
- Ocena
- 3,667 / 5
- Polubienia
- 19
- Pobrania
- 389
- Wydruki
- 2
- Wyświetlenia
- 1656
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- GNU General Public License v2.0
The slim case is excellent but too low for three layer keyboards.
The remixed case is higher to make it fit, and it fits well, height-wise.
Now Aliexpress sells variants of the Silakka54 that have a slightly bigger PCB on the corner with the MCU as well as three layers.
I used negative cubes to allow the keyboard to fit into the case.
Open the 3mf as project in Prusa Slicer (should work in Orca too) - it contains two negative volumes that "do" the actual cutout.
Print the 3mf once, then mirror everything and print again. The MCU cover can be taken from the remixed project, maybe even from the original.
I used PLA with 20% Gyroid infill and ironing for the top layer, but feel free to do whatever you like :)