1 / 2
Elastic string powered Low Hardware Talon Claw U (LHTCU) remix
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inspired by @gargunkle's Frayed Knot, I created my own remix of the LHTCU from the original files.
- Ocena
- 4 / 5
- Polubienia
- 33
- Pobrania
- 57
- Wydruki
- 1
- Wyświetlenia
- 573
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (16)Wydruki i komentarze (Wydruki: 1) (Komentarze: 10)Remiksy (0)Kolekcje (22)Powiązane
By request, I'm uploading this personal remix from almost a year ago. I'll try to remember why I did what I did as best I can.
I've remixed:
- Remixed front and back magwell parts
- Shortened the printed plunger tube (and liner)
- Remixed the plunger to combine features of the LHTCU and Esper
- Created space to use up to three 4mm thick elastic strings instead of a spring
- I also modeled up some O-rings to print in TPU if you really have to. (I used colorfabb's foaming TPU and it seems to be working well enough.)
- Shortened the barrel and bolt arms. I think I probably had to do this to change the length of the priming stroke with the new shorter pressure tube.
- I also added printable screws to clamp the barrel and SCAR in place, though they are of dubious usefulness unless your tolerances are extremely loose. I would suggest lying the barrel screw on its side and sinking it into the bed a bit for a stronger print orientation.
- The sear is from the Frayed Knot by @gargunkle.
I've included my extremely messy STEP, which is itself just a heavily modified version of the original LHTCU STEP.
NOTE: The files here only represent the parts I've changed from the stock LHTCU. For all other parts and assembly instructions, refer to the Low Hardware Talon Claw U.