1 / 2
Elastic string powered Low Hardware Talon Claw U (LHTCU) remix
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Inspired by @gargunkle's Frayed Knot, I created my own remix of the LHTCU from the original files.
- Rating
- 4 / 5
- Likes
- 33
- Downloads
- 57
- Makes
- 1
- Views
- 573
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
By request, I'm uploading this personal remix from almost a year ago. I'll try to remember why I did what I did as best I can.
I've remixed:
- Remixed front and back magwell parts
- Shortened the printed plunger tube (and liner)
- Remixed the plunger to combine features of the LHTCU and Esper
- Created space to use up to three 4mm thick elastic strings instead of a spring
- I also modeled up some O-rings to print in TPU if you really have to. (I used colorfabb's foaming TPU and it seems to be working well enough.)
- Shortened the barrel and bolt arms. I think I probably had to do this to change the length of the priming stroke with the new shorter pressure tube.
- I also added printable screws to clamp the barrel and SCAR in place, though they are of dubious usefulness unless your tolerances are extremely loose. I would suggest lying the barrel screw on its side and sinking it into the bed a bit for a stronger print orientation.
- The sear is from the Frayed Knot by @gargunkle.
I've included my extremely messy STEP, which is itself just a heavily modified version of the original LHTCU STEP.
NOTE: The files here only represent the parts I've changed from the stock LHTCU. For all other parts and assembly instructions, refer to the Low Hardware Talon Claw U.