1 / 6
4x2 inch RC Car Wheels W/"Bead Lock" (12mm hex) — zdjęcie 1
1 / 6

4x2 inch RC Car Wheels W/"Bead Lock" (12mm hex)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Bigger wheels for RC cars

Ocena
0 / 5
Polubienia
3
Pobrania
27
Wydruki
0
Wyświetlenia
169
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Public Domain

Theses are bigger than the stock wheels for my 1:14th scale DEERC. It had no grip in my grass. So, I made these to rip through my yard.

Attention: You might need to trim your cars body, if the front wheels hit the “wheel well”.

There are for 12mm hexes, but you can print new hexes for your use case. I'll add some different versions of the rims, ASAP.

Support needed for the rims.

At least 2 walls and 20% infill for rims.

1 wall for the tires makes them just squishy enough.

I set infill to 0% then used a modifier to have 10% gyroid, everywhere except the tread. Having 0 infill in the tread makes them have the perfect amount of flex. (Screenshots Included)

Tagi