Spiky Rollers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stim/massage toys - spiky cylinders which fit onto paint rollers.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 73
- Wydruki
- 0
- Wyświetlenia
- 360
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These are spiky rollers - spiked cylinders to be fit onto paint rollers, for massage, stim, or BDSM play. These are 120mm tall (~4.7in), and have an ID of 40mm (~1.6in). They'll fit onto US standard 1.5in paint rollers, as pictured - I used this 7in one: https://www.homedepot.com/p/7-in-4-Wire-Roller-Frame-RF200-7/202061386
“easy” and “medium” are pretty gentle. For me, “hard” is somewhat uncomfortable, and “extra hard” is painful (in a good way). Your experience may differ.
I've included the OpenSCAD file to generate these - it's pretty parameterized, so it's easy to adjust it to fit other rollers or other mandrels. There are also parameters for the spikes. The longer and narrower the spikes, and the fewer the spikes, the more intense it will be. And conversely, more spikes, shorter spikes, and an aspect ratio closer to 1 all make it less intense.
The pictured parts are printed out of PolyTerra PLA, which has a nice matte finish, and feels good to the touch. I printed them at 0.12mm layer height (with a 0.4mm nozzle) to have finer steps on the spikes. 0.2mm should be acceptable, but if you're patient, finer layer heights are beneficial for this part.
I used Gemini Code Assist as part of writing the OpenSCAD file. The code works, but I don't endorse it as high quality ;)