1 / 4
IKEA Skadis Hazet 810R-1 Driver Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inspired by Erntekoenigs Wera holders but completely made from scratch for the Hazet Bit-Driver.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 58
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hello,
while browsing Printables and searching for a holder for the slightly oversizet Hazet 810R-1 Bit-Driver i got inspired by Erntekoenigs Wera Screwdriver holder. So i designed it from scratch to fit the Hazet Handle.
I adopted the mountingsolution via the slidein hook, which is a very slick design.
Print it laying on the back for the best stability.
Print Info:
| Printer | Elegoo Neptune 2s |
| Filament | Elegoo PLA black |
| Layer | 0,2 |
| Supports | you can but you don't have to |
| Adhesion Type | Skirt |
| Print Time | ~ 2,5h |
| Infill | 15% |
| Nozzle | 0,4 |