9mm Magazine Loader
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Aids in loading a 9mm magazine
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 98
- Wydruki
- 1
- Wyświetlenia
- 443
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Aids in loading a 9mm magazine. It fits the magazine from an Sig P365 and may fit several other magazines of similar size. It has no moving parts. It's not as fast as commercial loaders, but it definitely works. The opening in the loader is 22mm x 37.5mm.
Place loader over the magazine with the loader's front surface facing forward and its pusher post is towards the rear of the magazine. While pushing down on the loader, partially insert a cartridge until it catches on the lips of the magazine. Lift the loader up about 10mm and then push the cartridge all the way back into the magazine. Repeat.