Liczymy pasujące modele…
Works on HiCapa magazines and possibly other magazines with similar dimensions. Tested on Army Armament and extended magazines. Designed to be ergonomic, has two tabs for better grip. And a non-obtrusive lanyard hole.
Loved the original version created by Adam, Just wanted to keep my cards more protected.
.22 Cartridge Sorter/Loader Assist This is a tool I made to streamline loading .22 cartridges into my .22 case design (https://www.printables.com/model/1086578-22-lr-ammunition-case). Loading 200 rounds one at a time is predictably…
Speed loaders for Mossberg MC2 and MC1 9mm handguns. The MC2 loader is somewhat of a snug fit which made things easier for me. If you want a looser fit you may want to scale it up 1-2%. I have confirmed that the MC1 loader is also…
Attention! If you have a Prusa XL, you'll want to check out my new loader that mounts to the frame and is always at the ready: Also, be sure to check out the remixes for some great optional parts! No XL? How about Core One INDX? About…
Now this took me some effort. This is an analouge to the Odin, yes, however they only share the same principle, (and naming conventions because irony). Chernobog has features. Hand crank for loading with one hand holding magazine with…
It is a very simple box I made to hold an RCM Loader, it's charging cable, a microSD Adapter and two microSD cards. It has 2 holes for 8x2mm magnets. UPDATED : -Fixed magnet alignment -Hole added for better access to the RCM Loader…
For those who are more interested in accuracy than rate of fire, this is a single shot loader for the Benjamin Marauder. Its generally considered that Single Shot Loaders give a much better, repeatable accuracy due to the fact that the…
For those who are more interested in accuracy than rate of fire, this is a single shot loader for the PP800. Its generally considered that Single Shot Loaders give a much better, repeatable accuracy due to the fact that the pellet is…
Aids in loading a 9mm magazine. It fits the magazine from an Sig P365 and may fit several other magazines of similar size. It has no moving parts. It's not as fast as commercial loaders, but it definitely works. The opening in the loader…
***UPDATE 27.04.2026 -Added V2 of the adapter. It will automatically reset your "stop on empty mechanism". Big thanks to "Manamuner", member of the Heavy Recoil Club, who suggested, and tested it for me. ***UPDATE 08.08.2025 -Front Loader…
***UPDATE 13.05.26 Added a new variant, that will automatically reset your STOP ON EMPTY mechanisim, everytime you load a magazine. The Idea was thought up by Manamuner, a member of the Heavy Recoil Club. To honor his contribution this…
The loader uses a simple roller system to guide the film smoothly through a light seal, preventing scratches and keeping the film aligned as you spool it into cassettes. The design is straightforward to assemble and doesn’t require any…
Loading Adapter for the VFC V3 M4 Magazines, Prints completely support less and provides and easy compact loading system for those who use VFC GBBR Magazines The Rear notch allows for the easy unloading of magazines straight back into a…
I designed a replacementpart for a broken Bruder bucket adapter plate to fix our wheel loader. I used a prusa XL 2 toolhead so i could use a seamless support interface using PETG for the part and PLA for support structure. I highly…
Exactly as the title indicates, this is a speedloader for Taurus GX2 and GX4 mags. Print upside down and no supports are needed.
For those who are more interested in accuracy than rate of fire, this is a single shot loader for the Fx Impact. Its generally considered that Single Shot Loaders give a much better, repeatable accuracy due to the fact that the pellet is…
printed in PETG 3 walls myself. clicks over and onto the existing loader front
Assembly requires: 2x M5x45mm screws + nuts 2 short M3 screw with nut one side adhesive foam 2mm height superglue lightproof tape (optional) First glue Body and Body2 with super glue, then cut two pieces of adhesive foam and stick it to…
My son wanted a Toploader card holder that resembled a pokeball which meant painting the cover in the Slicer. This wasn't easy as it was a single part. So I used Fusion 360 to create separate parts for the different colours which made…
Vesta Sentinel 15-ball loader by lucdu19, but merged together the bottom magazine parts so you don't need assembly. Slightly changed some values for a tighter fit. Big thanks to lucdu19, great model and a lot of fun to mod. I printed this…
This skid steer loader is modeled after the classic Czechoslovakian UNC 060, a machine still commonly found on construction sites today. Its timeless design makes it a perfect addition to layouts from any time period. The kit comes in…
A simple speedloader for CZ Shadow 2 mags I made. Wasnt a fan of the other models out there so heres my version. Feel free to remix if you so desire. I printed mine in PETG with a .15mm layer height and 40% gyroid infill with 3 perimeters…
The original bottom cap broke due to tension from the normal twisting the top spout. I used TinkerCad to design and replace that bottom (black) piece. IF you increase it by 05% it will be a looser fit so that it will not keep tension on…
Print it laying on its back with supports on. I've only tested it with Canik mags, could likely easily be modified to fit other mags as well.
For Glock 9mm Double Stack Magazine Engineered for comfort, speed, and reliability, this Glock 9mm magazine speed loader makes reloading effortless. Its ergonomic design reduces thumb fatigue while allowing smooth, consistent…
Easy, convenient, and FAST filament loading for your Genuine Prusa XL! Just insert the filament into the sensor and past the loading gears then press the associated paddle to simultaneously provide clamping force on the filament and…
A storage holder for your Sleeves, Toploaders and semi-rigids!
This is a 3D-printed RC wheel loader built using standard electronic components such as H-bridges, buck converters, and an ESP32. There is a full Length YT video below which goes over everything it can do "Such as being able to swap…
This is the nut that you turn to give the tape more or less friction. If this part breaks the tape dispenser is pretty much useless. I printed this with the more simple side facing down and supports enabled - for support enforcers only.…
A wheel loader, modeled after the loaders used in mines. The model is printable and resembles machines used in mines and construction sites. It can be printed, but the model requires supports.
Tired of your valuable trading card collection gathering dust in flimsy cardboard boxes or getting jumbled on shelves? Upgrade to this sleek, professional-grade Magnetic Storage Box, the ultimate solution for serious collectors of…
John Deere 48 Front Loader - 1:8th Scale Made to fit the 3020 and 4020 tractors I have modeled. Uses M2 and M4 Screws. Indents indicate where holes need to be drilled out. Would love to see pictures of your makes!
Tire mold for silicone tires for boots loader. Two parts mold. Made it a tight fit when going together to hold it. Want to use a tear resistant silicone. Have to twist the mold half's to get the tire out. Pics to help see how its done.…
Front spotlight arms for 3mm LEDs with holders. There is no need to reprint the front chassis, just pass the wires into the hole above the fender, line up the arm and drill a small 2mm hole, the bottom arm has an indentation that goes…
Please note that this design has not yet been physically printed or tested. If you decide to print it, feedback is highly appreciated. Feel free to share any issues, fitment problems, or improvement suggestions so the design can be…
This is a Base Plate and Loading Ramp to speed up magazine loading when using the Ludex Glock Speed Loader available from Amazon. There are two .STL files, one includes holes for 4mm screws/thumbscrews to secure the Ludex unit to the…
Added 4x 3mm LEDs to the rear bumper, the LEDs need to be mounted with their holders. The red wire with the resistor needs to be desoldered, turn the wire around and solder the other end to the LED.
This is an amazing way to keep your cards safe even when your traveling! The top easily slides on and off and it can fit both penny sleeves and top loaders to keep cards in prestine condition! its a super basic print as its essentially…
this is a super great way to travle wih penny sleeves and top loaders at all time to keep your cards in mint condition! Not only is it great for travel but you can also just bring it along with everyday life! It uses 8 3*5 magnets (3mm…
The first of four... Hello, lovers of refined shooting, I printed a few revolvers for Carnival this year. They work perfectly. Thanks to DeSteiner for that. But, as always, there are ideas for customisation. Now that the revolver can…
The second of four... Hello, lovers of refined shooting, I printed a few revolvers for Carnival this year. They work perfectly. Thanks to DeSteiner for that. But, as always, there are ideas for customisation. Now that the revolver can…
The third of four... Hello, lovers of refined shooting, I printed a few revolvers for Carnival this year. They work perfectly. Thanks to DeSteiner for that. But, as always, there are ideas for customisation. Now that the revolver can…
Filmlader "Dayroll" von "LPL" "HAMA". Einfache Reduktion für den Spulenkern der Filmspulen mit 25,4 mm (1 Zoll) auf den Dorn des Filmladers mit 8 mm. Zwei verschiedene Ausführungen. Sollte auch für Filmlader ähnlicher Bauart passen. Im…
A tool to ease the loading of Beretta Bobcat 20X .22LR magazines. It comes in two variants, one with wings and one without. The wings variant allows for easier unloading and improved one-handed operation. The no wings variant is more…
Introduction This simple design holds your Bowden Speed Loader by MrFlippant. It's meant to be mounted to an IKEA Skadis panel for quick access. Alternatively you could modify the holder (step file included) to mount it to other surfaces…
Prusa XL needs an filament loader. This model is powered by Prusa XL printer power source (24V), is easy to print (no supports, 0 infill), install and it works even with flexible! Videos Bill of materials PETG filament 50 cm cable 20 awg…
This unit will help relieve the strain on your hand when loading multiple magazines with a magazine speed loader such as the Ludex Speed Loader. Print with TPU (or another Flex-type filament) using default Prusa slicer settings. It works…
Some improvements to the model. Still haven't been able to get it functional and ran out of time to work on it. Maybe someone can pick up my pieces.
for pouring bb's strait into your magazine without a speed loader
I made this 1 to 1 copy of this red part on my parkside x20v nailgun that broke while reloading the nails. I printed mine in Black Elegoo Rapid PETG in about 50 mins. 4Walls 15% infill.
Rinjamin's model is great, I just had a hard time fitting all of my tokens inside. There's a couple of versions, starting at 5mm wider (which is plenty wide for my deck + tokens), up to 25mm wider, in increments of 5 mm.
This is a 50 round ammo tray for the Smith & Wesson 617 10 shot revolver. I know that it works with SpeedyBeez speed loader and would assume it will work with others. 50 rounds to work with Steel Challenge stages 100 rounds because more…
To save Gridfinity space, I created this 1x1 Gridfinity Holder for the Bowden Speed Loader. By mounting the speed loader vertically, this should work for any of the remixes of the original Bowden Speed Loader. Links:…
This is an insert of CCI 100 round boxes that stores 40 rounds in a way that works with speed loaders. There is no space in the box for the actual loader, this holds ammo only. I print them upside down but it shouldn't really matter, no…
This is a remix of the interlocking loader-loaders by masonEcooper https://www.thingiverse.com/masonEcooper . My initial version was similar to the masonEcooper design, with a "lollypop" shaped locking rib. All the rest are multiple wedge…
It's simple mag unloader for BB Bottle that let you… unload mags straight into bottle
(10/1/23) Overhauled the design to be a better fit with a wide range of magazine tolerances. Designed around genuine HK, MKE, Zenith/KCI stamped magazines. Untested with polymer magazines. A bit of grease in the cartridge channel can make…
Deutsch: Dies ist mein Lade-Ständer für unsere iPhones (mit 13, 14 und 15 plus getestet). Das Ladepad wird mit der gedruckten Schraube leicht fixiert. Ich habe die Schraube auf meinen Druckern im Slicer auf 108% skaliert, dann passt sie…
Fits on Küpper/Kuepper Pegboard and holds Hornady Powder Trickler for reloaders.
Fits on Küpper/Kuepper Pegboard and holds RCBS Lube Pad and Bottle for reloaders.
Toploader Trading Card Frame Pallet Style is an easy to print frame that you can show off your cards in a toploader! Use a command strip and hang on wall, have fun! NEW added a way to print flat in half the time! .gcode file is attached.…
We got a second-hand Bruder Cat as a gift for my daughter. Unfortunately, the original shovel cannot be found. So I designed a new one. I do not know if the shovel fits to several Bruder models. I printed it from PLA with a layer height…
Replacement Lid for the Odin Speedloader for easy unloading of mags. BB stopper is only necessary to stop bbs from comiing out while transporting the speedloader in a bag Lid might need some sanding at the edges to move freely I printed…
I made an exact replica of the original VFC Speedloader adapter, because I lost mine. I tested it on a V2 416 mag and it worked fine. this probably works with other brands as well. Give it a try and submit some feedback please.
If you are using browning or both types of mags go with 6.5. (Ruger & Browning) If only Ruger and Rail go with 6.4. (Pocket Version) If you also want to use box for loose ammo go with 6.3. 2026.02.10 Ruger &!! Browning Buckmark 22 LR…
This is a speedloader for the standard Pardini SP 5 shot magazine that I designed. I use it mainly so that I don't get oil on my hands from certain brands of ammo. https://vimeo.com/939679785
Printed on Bambu X1C in PETG-HF. No supports used - it will print fine without them. Use raft if you have a bed slinger printer or have issues with ambient temperature regulation. Print Settings Printer Brand: Bambu Printer: X1C Rafts:…
This is a speedloader created some time ago, for FX impact high cap magazine .25 Add a tiny bit och grease on the small contact points, might be a bit stiff the first couple of uses.
This tool was developed to help with loading filament passed the filament buffer that Prusa developed. You simply slide in the buffer wheel assemble and then feed your filament through and down the to machine. After it is loaded in the…
I really liked this design but it didn't fit the hair ties I already had, so I shortened the hair tie paths to fit them better. The hair tie paths are also cleaned up to remove an overhang in the middle. I added a chamfer to the top and…
print from PLA, PETG, (I printed from ABS) this version is for Metal Gear Motor 6V DC
This is a slight upgrade to most loader options I've seen. I designed this with a pin that slots through the round hole near the bottom of the mag to hold the spring down. The pin has tight tolerances and can be stored inside the loader…
This is a speedloader, or something like it, for the LMG I designed. You just insert the links, and it holds them in place while you load darts. ------------------------- I have added a compliant pawl plate, which means it's a single part…
It will need: 0.3" dia. x 2" length spring 0.11"dia. x 0.3" length spring 3x small screws for a 0.1" dia. hole, 0.3" length Note: I have added STEP.files so that the connection holes can be adjusted for individual printer tolerances. I…
***Updated the model 9/27/2024 to V3 with a better fitting clip mechanism for the roll *** I needed a quick way to re-roll some 2kg to 1kg rolls for smaller machines within enclosures where a 2kg roll just doesn't work well & this is how…
Passend für Tippmann Bravo One Tippmann Magazin 12x: https://www.amazon.de/gp/product/B07DPC74F7/ref=ppx\_yo\_dt\_b\_asin\_title\_o05\_s00?ie=UTF8&psc=1 Einpressmuttern:…
Hydraulic ram seal for farm tractor loader with 55 mm rams requiring rams seals size 55x65x12mm. This was the case for my Ålö-Quicke 2000 series farm tractor loader and these seals were made as a quick fix to stop oil from dripping in…
Simple funnel for odin speedloader with a cut out for the bar that goes across for the screw. sits nicely with or without the rubber insert. Print upside down (Use a raft if doesn't adhere well)
Speed loader for Smith & Wesson 9mm 17-round magazine. It may work with other magazines, but I haven't tested it.
Both are printed with the small face at the top on the buildplate without supports, step files are available.
This is a solution to display your favorite Trading Cards with a Toploader (i used Ultra Pro) inside the ikea picture frame called “SANNAHED”. (https://www.ikea.com/de/de/p/sannahed-rahmen-weiss-00459116/) These Frames have the perfect…
10 round speedloader for both standard metal and polymer magazines, and an original length version for polymer magazines. Also, an added “Pusher” for easier sliding of rounds. The pusher works for both long and short versions. I…
Works on HiCapa magazines and possibly other magazines with similar dimensions. Tested on Army Armament and extended magazines. Designed to be ergonomic, has two tabs for better grip. And a non-obtrusive lanyard hole.
Toploader holder for kpop photo cards or other photos with space to personalize
Made my own simple 9mm Speedloader. Haven't tested it with a lot of Magazines yet, but works great with my Beretta 92X. Print it laying down with ONLY Perimeters as walls. No infill.
My original BB speed loader (or fast loader) rod / trumb armature broke, so I designed a new one to be slightly stronger. Print the "split" version it in ABS or PET-G, glue the two sides together with super glue, finish it with a file or…
