Counting matching models…
Update 2022/04/19 I've created a version of the Mark 3 arms for 2020 VSlot aluminum extrusions. Check out the remix section! Update 2019/10/18 I've imported this project from my Thingiverse account. To make things clearer, only the Mark 3…
Print approx. €4.28–€5.24 excl. taxPreliminary estimate for PETGSource material: PET
About I'd been rolling around ideas on how to design a SideKick for the 4 nozzles on each side of the Core One INDX design. I started working before release by using various photos and video stills to guesstimate certain measurements. As…
Print approx. €4.07–€4.98 excl. taxPreliminary estimate for one variant
This Speed Loader slides over the top of the magazine for controlled movement down the mag for easy loading.
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for PETGSource material: PET
Made my own simple 9mm Speedloader. Haven't tested it with a lot of Magazines yet, but works great with my Beretta 92X. Print it laying down with ONLY Perimeters as walls. No infill.
Print approx. €1.61–€1.96 excl. taxPreliminary estimate for PETGSource material: PET
If you use the Gcode everything is ready to go for PLA If not I use these settings: Infill: 15% Pattern: Gyroid Supports: auto generate w/ overhang threshold set to 1 degree Nozzle: First layer 215, other layers 210 If you have a prusa I…
Print approx. €2.84–€3.47 excl. taxPreliminary estimate for one variant
Cardholder for toploader or multiple sizes of tradingcards, slightly angled, for diffrent layer heights,no massiv infill
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for one variant
This is my own design of the speed loader for 4.5mm steel balls. This is very good , handy tool without any spring or any movement parts. The full capacity is 967 BBs. What you need is just open it and load few hundreds BBs then close it…
Print approx. €2.07–€2.53 excl. taxPreliminary estimate for one variant
This is a 3D-printed RC wheel loader built using standard electronic components such as H-bridges, buck converters, and an ESP32. There is a full Length YT video below which goes over everything it can do "Such as being able to swap…
https://www.youtube.com/shorts/nvIDWYT1Sxo *edit 03.25.23 added a 150% scale version *edit 04.14.22 added high-poly egg with magnet lock (fits 3x1mm, add a drop of glue) I have completely redesigned the old Surprise Egg #3 - Tiny Wheel…
Attention! If you have a Prusa XL, you'll want to check out my new loader that mounts to the frame and is always at the ready: Also, be sure to check out the remixes for some great optional parts! No XL? How about Core One INDX? About…
Print-in-place and Articulated Surprise Egg #3 - Tiny Wheel Loader 'Making of' video: https://youtu.be/1pnJB7RGQEE Stresstest your 3D Printer by printing this tiny collectable stocking stuffer. Both the wheel loader and the egg was each…
Hi! This is another Electric speed loader for Airsoft. This is the basic version. You can also get the upgrade package here: https://cults3d.com/en/3d-model/game/airsoft-electric-speed-loader-upgrade-package-to-advanced-version It counts…
Remixed from the excellent source model - thank you FW_3D for uploading the .step files 🙏 Differences from the original: Added clearance for rounds Added captive guides to the pusher to keep it engaged Rotated viewing slots to allow…
If you read this, please leave a ❤! An adapter I made to I can more easily reload my airsoft pistol mags. Printed in PETG. The short version sticks out less but requires a little extra finesse with gloves on. Edit 11/29/2023 V2:…
Skid-steer loader (Easy print - NO SUPPORTS) for some parts like seat, body, cage and axis caps use glue Print settings 0,2mm layer 3 walls (for axis use 5 walls) 15% infill (for axis and inner part of wheels use 50% infill) for long axis…
How it works: https://vimeo.com/544208321 This is the 6 version of my speedloader. It has many new features: the cartridges does not fall out when the magazine is not inserted it is suitable for smaller printers there is the possibility…
(10/1/23) Overhauled the design to be a better fit with a wide range of magazine tolerances. Designed around genuine HK, MKE, Zenith/KCI stamped magazines. Untested with polymer magazines. A bit of grease in the cartridge channel can make…
Speedloader for multiple types of magazines. Print one body then the Insert type/types you need and switch out just the insert. Easy Disassembly. Springloaded. Quick change insert/part replacement. 100% 3D Printed.…
Save those finger tips! can be used on any ruger mk magazine as well as browning buck mark magazines and probably more!
This is a magazine loader/thumb saver/speed loader for the Ruger Mark 1,2,3,&4 (I,II,III,IV).
It will need: 0.3" dia. x 2" length spring 0.11"dia. x 0.3" length spring 3x small screws for a 0.1" dia. hole, 0.3" length Note: I have added STEP.files so that the connection holes can be adjusted for individual printer tolerances. I…
A remix of @DocKuro 's great model. A Magic: The Gathering Commander deck box with token tray and resized the window to accommodate a Commander card in a top loader. I also removed one of the dividers in the token card area to create a…
Exactly as the title indicates, this is a speedloader for Taurus GX2 and GX4 mags. Print upside down and no supports are needed.
This is a speedloader for the standard Pardini SP 5 shot magazine that I designed. I use it mainly so that I don't get oil on my hands from certain brands of ammo. https://vimeo.com/939679785
Remixed the original "giant powder funnel" to accomodate MEC loaders where one bottle is shorter than the other (like the stock photo uploaded). Chopped off one side with a flat surface. (Sorry for the poor quality photo of it in-use. My…
storage for 25 toploaders. The model has a cutout on the front to easily access the sleeve and to see how many are inside the box. If you have cards in the toploaders, there is a lid to add additional protection from light/UV damage and…
Easy, convenient, and FAST filament loading for your Genuine Prusa XL! Just insert the filament into the sensor and past the loading gears then press the associated paddle to simultaneously provide clamping force on the filament and…
Simple device to reload 35mm films. For example you need to test new camera/lens/film and don't want to shoot all 36 exposures. You can make 3 rolls of 11 exposures each, out of 36mm cassete. It's especially usable if your film is not…
this loading tool is made for 2 magazines(cylinders) so as shown on the picture can you move the pellets to the side in the grove after your done loading. and push the cylinders out from bellow when your done. Category: Sport & Outdoors
This is a speed loader for the swiss Sturmgewehr 90/Sig SG550. Its functionality is the same as that of the standard loader. Additionally, it can be clicked onto the side of the magazine for storage. Printing Notes: The tolerances are…
DESCRIPTION The mechanism for an easier and safer way of loading pellets for Weihrauch HW97. https://www.youtube.com/watch?v=DDRhrUY8kvM Full list of parts and tools in attached PDF READ FIRST before you decide to start work on this In…
Fits on Küpper/Kuepper Pegboard and holds RCBS Lube Pad and Bottle for reloaders.
This is a speedloader, or something like it, for the LMG I designed. You just insert the links, and it holds them in place while you load darts. ------------------------- I have added a compliant pawl plate, which means it's a single part…
Easy Loader - Rack/Holder Accessory Stand for holding 4 easy loaders, 2 brushes, 1 scoop and 2 S&B pick tools!
Linear Table Designed for smart reloader 3000 shooting front rest but could have other uses. 100% would be better milled, but use the tools you have! There are a couple of different base options : one is the one with clips designed to…
Improve your orbital sander's dust extraction by precisely aligning holes in sandpaper sheets. Helps stack discs in a very neat and organized way. Printing Rigid filament, 10%+ infill. Layer height doesn't matter. No supports needed, but…
This speedloader with an ordinary PET bottle thread and a cap shall be printed without supports and with fine print settings. I use 0,16 mm layer height and PETG to ensure more durability for higher summer temperatures. PLA is fine, too,…
This tool holder replaces the spacer on the casefeeder tube and is slotted to reuse the exiting bolt. It fits on the upper bolt. It holds all the standard tools included in the Dillon XL650 Bench tool set. It is built to positively index…
I take no credit for this work. These files, as well as the text below, are 100% the work of Paul Boswell, the creator of Turing Tumble (the marble-powered computer). You can find these files shared publicly on his website:…
P-loader for PMAGs - v0.1.1 All that is needed is 2 typical 5mm diameter compression springs, found in MOST pens. Figured I'd upload this and get the files out so if anyone wants to work and remix this they're more then welcome and…
A simple speedloader for the Swiss military 9mm pistol P220 / P75 with single stack magazines. Possibly works for P210 as well. Print as is standing on the cross without support.
Simple but effective quick load aid for FX Impact high-capacity magazines for M4. Tested for .22 and .177 calibers, but possibly compatible with larger calibers (please, confirm me)
S$W 45 Shield Mag Loader.
Added 4x 3mm LEDs to the rear bumper, the LEDs need to be mounted with their holders. The red wire with the resistor needs to be desoldered, turn the wire around and solder the other end to the LED.
It's impossible to find new bushings for Texan loaders, and stupidly expensive for used ones. People were selling 3d printed ones at ripoff prices so I figured I'd throw my own up. These cost about 15 cents and 20 minutes each to print.…
DESCRIPCIÓN DEL MODELO 3D Descripción: Este es el archivo .stl de mi caja de mazos para los juegos de mtg. Cualquier reventa o reproducción de este modelo sin mi consentimiento está prohibida. También necesitarás dos imanes de 8mmØ x 2mm…
Printed on Bambu X1C in PETG-HF. No supports used - it will print fine without them. Use raft if you have a bed slinger printer or have issues with ambient temperature regulation. Print Settings Printer Brand: Bambu Printer: X1C Rafts:…
I created a 5-dart speedloader for nerf elite magazines (not short dart or nerf N1 series dart compatible). This speedloader allows you to carry more darts without spending money on magazines or other hardware. This model is 100% printed…
This is a remix of the awesome AK Speedloader by “nnicclaas” https://www.printables.com/model/265775-ak-magazine-speedloader . The modification adapts it for the VZ58 magazine. Unfortunately, I do not have a photo available. Recommended…
It's impossible to find new bushings for Texan loaders, and stupidly expensive for used ones. People were selling 3d printed ones at ripoff prices so I figured I'd throw my own up. These cost about 15 cents and 20 minutes each to print.…
Sits on top of the 3Devo hopper lets you stage your pellets to load the next batch and keeps debris from getting into the batch of resin currently being processed Printed in PLA 25% Infill (Cubic)
This is just the body, you will need the rest from the original: Door.stl Bearing.stl Feeder.stl Nozzle.stl Handle.stl Handle 2.stl Handle 3.stl Handle mount.stl Housing.stl 6 m3x10mm 6 m3x10-20mm 1 m6x20 1 m6mm nut
Fits on Küpper/Kuepper Pegboard and holds Hornady Powder Trickler for reloaders.
A Gelblaster Speedloader to fit on a bottle with a PCO 1810 cap/thread (most soda/drink bottles)
this loading tool is made for 2 magazines(cylinders) so as shown on the picture can you move the pellets to the side in the grove after your done loading. and push the cylinders out from bellow when your done. Category: Sport & Outdoors
This is modeled after a Glock 26 and dimensionally is very close. I printed it with the slide down in HattchBox Black PLA. This one uses a mount that replaces the half moon spacer washer on the casefeed tube and the pistol slides in place…
Upgrade your reloading setup with our custom-designed and 3D printed Casefeed Adapter Storage Rack, compatible with the Dillon XL650 and XL750 reloading machines. This compact and efficient storage solution is perfect for keeping your…
Working off the great design already provided I made a few modifications to make it easier to print. I removed the text from one side. This can be printed on most printers as a single piece with the flat side to the bed. There are only…
This is a speedloader based on the design of AgentTwisted. I really liked the functionality of his speedloader, I just wanted a more polished look. Also, I preferred the original HS Produkt labeling to the rebranded Springfield Armory…
As far as I can tell, there aren't any spent primer catchers for the Texan Loader presses. This one slips under the spent primer hole for conveniently catching primers instead of letting them roll everywhere. Print with supports…
***Updated the model 9/27/2024 to V3 with a better fitting clip mechanism for the roll *** I needed a quick way to re-roll some 2kg to 1kg rolls for smaller machines within enclosures where a 2kg roll just doesn't work well & this is how…
Speed loader specifically for the AWCY? Scarpion-22 printed magazines. I couldn't find an existing loader for these mags that was free, so I modeled this from scratch. Print upside down with supports.
A saw how my team mate painfully unload BB from shell-magazine of his shotgun. Now it's much easy, just insert shell into unloader, little press on shell and BB fall down to bag/bottle
Resized to fit the large frame magazines. It's a tight fit on the width, but works fine for me. If you want more ‘wobble’, you can stretch it 1-2mm on the width… Remix of the @IkarusIBK model.
I made the glass in single pieces and laid them flat for easier printing
DO NOT USE! DO NOT DOWNLOAD! DOES NO WORK OR FIT ON MOST PRINTBEDS! V2 COMING SOON! work in progress! will update when possible! this is still in testing, so any feedback is greatly appreciated! edit 9-6-25: all pushers need supports due…
Just print without supports, use bridging. 0.2mm PLA or PETG transparent. Fill it with your GBB 6mm shake and fill your magazine in just a second.
for pouring bb's strait into your magazine without a speed loader
1/48 german medium caliber gun loader. Simple model.
It's simple mag unloader for BB Bottle that let you… unload mags straight into bottle
Created a switch guard for this Speedloader with a D2F switch. Noticed that the switch was operating at unintended times. Switch Guard is for when you are not using the tool. Tool storage.
The original bottom cap broke due to tension from the normal twisting the top spout. I used TinkerCad to design and replace that bottom (black) piece. IF you increase it by 05% it will be a looser fit so that it will not keep tension on…
This is a custom skull-style lid designed for the Bautii M4 Speedloader . Just swap the lid for a more aggressive look inspired by Punisher-style graphics. 🔧 Compatible with: Bautii M4 Speedloader (body + gear system required) 👉 Download…
I made this 1 to 1 copy of this red part on my parkside x20v nailgun that broke while reloading the nails. I printed mine in Black Elegoo Rapid PETG in about 50 mins. 4Walls 15% infill.
If you are like me, you have always had trouble with carrying enough bbs to support a round of airsoft. I myself own an SR25 that offers very little magazine capacity. There have been multiple scenarios where I am in an optimal position…
This is a scoop that can be used to align multiple smaller envelopes (3.5 inches wide) into a larger clear envelope for a neatly packaged outcome. I use it to load lures already packaged in smaller bags into packages and multi-pack…
Generally speaking, the typical rules and courtesies for modding and reselling files within the NERF community apply the same for most of the models provided in and by the Magazine Speed Loader (MSL) system, just follow the licencing…
Strong, secure, versatile, no supports needed. Id recommend PETG. 0.4n, 0.2 layers, 4 wall, 8 top/bottom, 15% Gyroid. The washers are meant to prevent layer split with standard construction screws.
Works on HiCapa magazines and possibly other magazines with similar dimensions. Tested on Army Armament and extended magazines. Designed to be ergonomic, has two tabs for better grip. And a non-obtrusive lanyard hole.
Loved the original version created by Adam, Just wanted to keep my cards more protected.
.22 Cartridge Sorter/Loader Assist This is a tool I made to streamline loading .22 cartridges into my .22 case design (https://www.printables.com/model/1086578-22-lr-ammunition-case). Loading 200 rounds one at a time is predictably…
Speed loaders for Mossberg MC2 and MC1 9mm handguns. The MC2 loader is somewhat of a snug fit which made things easier for me. If you want a looser fit you may want to scale it up 1-2%. I have confirmed that the MC1 loader is also…
Attention! If you have a Prusa XL, you'll want to check out my new loader that mounts to the frame and is always at the ready: Also, be sure to check out the remixes for some great optional parts! No XL? How about Core One INDX? About…
Now this took me some effort. This is an analouge to the Odin, yes, however they only share the same principle, (and naming conventions because irony). Chernobog has features. Hand crank for loading with one hand holding magazine with…
It is a very simple box I made to hold an RCM Loader, it's charging cable, a microSD Adapter and two microSD cards. It has 2 holes for 8x2mm magnets. UPDATED : -Fixed magnet alignment -Hole added for better access to the RCM Loader…
For those who are more interested in accuracy than rate of fire, this is a single shot loader for the Benjamin Marauder. Its generally considered that Single Shot Loaders give a much better, repeatable accuracy due to the fact that the…
For those who are more interested in accuracy than rate of fire, this is a single shot loader for the PP800. Its generally considered that Single Shot Loaders give a much better, repeatable accuracy due to the fact that the pellet is…
Aids in loading a 9mm magazine. It fits the magazine from an Sig P365 and may fit several other magazines of similar size. It has no moving parts. It's not as fast as commercial loaders, but it definitely works. The opening in the loader…
***UPDATE 27.04.2026 -Added V2 of the adapter. It will automatically reset your "stop on empty mechanism". Big thanks to "Manamuner", member of the Heavy Recoil Club, who suggested, and tested it for me. ***UPDATE 08.08.2025 -Front Loader…
***UPDATE 13.05.26 Added a new variant, that will automatically reset your STOP ON EMPTY mechanisim, everytime you load a magazine. The Idea was thought up by Manamuner, a member of the Heavy Recoil Club. To honor his contribution this…
The loader uses a simple roller system to guide the film smoothly through a light seal, preventing scratches and keeping the film aligned as you spool it into cassettes. The design is straightforward to assemble and doesn’t require any…
Loading Adapter for the VFC V3 M4 Magazines, Prints completely support less and provides and easy compact loading system for those who use VFC GBBR Magazines The Rear notch allows for the easy unloading of magazines straight back into a…
I designed a replacementpart for a broken Bruder bucket adapter plate to fix our wheel loader. I used a prusa XL 2 toolhead so i could use a seamless support interface using PETG for the part and PLA for support structure. I highly…
Exactly as the title indicates, this is a speedloader for Taurus GX2 and GX4 mags. Print upside down and no supports are needed.
For those who are more interested in accuracy than rate of fire, this is a single shot loader for the Fx Impact. Its generally considered that Single Shot Loaders give a much better, repeatable accuracy due to the fact that the pellet is…
printed in PETG 3 walls myself. clicks over and onto the existing loader front
