Speedloader BB 4.5mm
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.07 – €2.53 net (excluding VAT)
For file: PI3MK3M_Speedloader.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.30 excluding VAT (range midpoint).
- Weight reported by the author
- 35 g
- Print time reported by the author
- 2 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is my own design of the speedloader for 4.5mm steel BBs. This is very good , handy tool .
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 34
- Makes
- 0
- Views
- 200
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
This is my own design of the speed loader for 4.5mm steel balls. This is very good , handy tool without any spring or any movement parts. The full capacity is 967 BBs. What you need is just open it and load few hundreds BBs then close it and shake, afterwards each loading portion will be 30 BBs. Just hold it and match the end with the loading whole in any pistol magazine and gently move it 45 deg and all 30 BBs will gravitationally load the magazine. Then just shake it more and the next portion will be ready. Have fun and Good Luck! PS. It works perfect with all my Umarex and KWC pistols.
Print Settings
- Printer brand:
Prusa
- Printer:
I3 MK3S
- Rafts:
No
- Supports:
No
- Resolution:
0.2mm
- Infill:
100%
- Filament material:
PLA
- Filament brand:
Any
- Filament color:
Transparent
- Notes:
Please print it from transparent PLA or PETG to see the BBs inside. Do not use supports. Just Print as it is. Please use Bridging in Cura and 3 walls only. Resolution 0.2 and with path 0.4mm. This model is optimized to this parameters. I am attaching all STL files and ready gcode for Cura and PLA Prusa printer for main part with proper settings.
If you like use it for 6mm BBs just scale it by 120%.