Multiconnect Wallplate for Tiltable VESA Mount (for Multiboard)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Multiconnect-compatible wallplate for mounting to multiboard
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 39
- Wydruki
- 1
- Wyświetlenia
- 456
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Added a Multiconnect backplate to the wallplate to make it multiboard mountable. It should be compatible with both 75x75 and 100x100, as they appear to share the same wallplate.
The wallplate is generated with the “Multiconnect Part Generator - Master Collection" by @blackjackduck on Makerworld. Matching the size of the backside of the original wallplate gives a 4x5 grid. I mounted it around a quad snap on my multiboard installation to give it the maximum mounting strength.
I have two of them in use, each holding a 22” 2.8kg screen. Out of the 20 multiconnect slots, I‘m using 16 (omitting the four corners) — most of them using the folded ones superglued, (so the layer lines are vertical) and a few near the bottom using the normal ones.