IKEA Skadis Valve Index Holder with Charging Function
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
0,09 € – 0,12 € netto (bez VAT)
Dla pliku: Valve Index Controller Holder Inlays_0.2mm_PLA_MK3S_7m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,11 € netto (środek widełek).
- Masa podana przez autora
- 1 g
- Czas druku podany przez autora
- 7,2 min
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
A Valve Index holder for IKEA Skadis pegboard with integrated charging function.
- Ocena
- 5 / 5
- Polubienia
- 98
- Pobrania
- 397
- Wydruki
- 9
- Wyświetlenia
- 3110
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution — Noncommercial
Inspired by the Valve Index Boomerang Charger and my lack of desk space.
Thank you to Valve for sharing their Index CAD files.
Make sure you have good layer adhesion and test the print, don't blame me for a dropped headset.
The holder includes a retention pin, slide it into position once the controller holders are on the board, to prevent them from lifting together with the controller. The pin might need some sanding to fit, I used a bit of graphite to lube it by painting the edges with a pencil.
Required Hardware
- 8 screws M3x6 for the controller holders back plate
- 2 screws M3x16 for the cable clamps
- 2 screws M3x8 for the headset back plate
- 2 magnetic USB-C cables (1 set) https://www.amazon.de/gp/product/B076PMSG48
To make the USB cable fit through the holes in the Skadis pegboard the metal shell of the USB end needs to be removed. You can replace it with shrink tube to make it look nicer.
Notes
Made with the personal version of Autodesk Fusion 360 therefore non commercial only.
Source files included.