Mushroom shelf “Fungus”

Would you like to support my work? :)
Check out my  full catalog with exclusives, early access and commercial licences.
— 

An organic shelf that “grows” from your wall.

If you need a small shelf for anything you want to make visible every day (like your favorite Benchy or a small plant) this is the one for you.

You can either screw or glue it onto your wall. There are various glue or tape products for wall fixation out there. I used 3M Tape.

Diameter of the two screw holes: 5,5mm

Size assembled: 80 mm x 115 mm x 105 mm

Print settings

Required build volume: 120mm x120mm x 120 mm

Material usage: 40g

Print time: 3 – 4 h

Material: PLA

Print direction: stls are rotated correctly, check images

Support: none

Nozzle size: 0,4 mm

Line width: 0,4 mm

Layer height 0,2 mm

Outer walls: 3

Infill: 15%

Build plate adhesion type: none