1 / 2
50mm to 40mm driver flange for PrusaBeat Headphones V2
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This flange allows you to insert 40mm drivers, without modifying the original parts.
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 47
- Wydruki
- 1
- Wyświetlenia
- 205
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Assembly
Warning: Make sure to not get glue on the membranes.
Required: Plastic glue for PLA and ABS/ hot glue (or any glue that works with your material of choice AND the material of the driver shelling)
- Glue & press the drivers gently into the flange.

- Insert the flange into the desired position inside the ear piece.

- Connect everything and close the earpiece with the other part.

