EZ replacement arcade stick for Pandora Box all-in-one consoles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use a 6x60mm hex bolt to replace a lost Pandora Box arcade stick for about 1 USD.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 90
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My family was given a well used Pandora Box arcade system, but it was missing the joysticks. Not wanting to order a new joystick unit, I snagged a pair of 6mm hex bolts from the hardware store, 60mm long and drew up this simple setup in cad.
To assemble, drop the bolt in the knob's hex hole, and secure it with the plug. My prints were secure without glue, but yours may vary. Slide the cover over the bolt, and screw into the machine. You might need to use needle-nose pliers to grab the base of the joystick while tightening. Don't go overboard. If you prefer the feel of a metal shaft, you can skip the cover and place a bit of wire heatshrink over the exposed threads.
I used 3 walls and 30% fill for a more solid feeling ball. Will upload more versions soon!