1 / 6
BetaFPV Meteor 75 Pro Walksnail Avatar canopy — zdjęcie 1
1 / 6

BetaFPV Meteor 75 Pro Walksnail Avatar canopy

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Canopy for Meteor 75 Pro (designed for DJI O4) conversion to Walksnail Avatar 1S VTX

Ocena
0 / 5
Polubienia
8
Pobrania
68
Wydruki
0
Wyświetlenia
885
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Public Domain

To make Meteor75 Walksnail version you need (not affiliate links):

  • Bare drone (BetaFVP Meteor 74 pro O4) without DJI VTX (https://www.aliexpress.com/item/1005008676522575.html)
  • Walksnail Avatar 1S V3 VTX (https://www.aliexpress.com/item/1005009011769847.html) 
  • Happy model LHCP 5.8 GH antenna (with  (https://www.aliexpress.com/item/1005006459921719.html) with short wire and ipex connector
  • TPU filament

It is important to properly setup supports for print:

Model must be upside down

Final support must look like:

Do not forget to dry filament before print. Plastic tube on antenna must be carefully cut (shortened) to fit nicely in canopy. Orient VTX like on 4-th photo for best cable management. Mount first screw to fix VTX to drone under camera (front). After that mount another 3 screws to secure canopy to VTX and drone frame.

Total weight of canopy is 2.7 grams:

Tagi