1 / 6
BetaFPV Meteor 75 Pro Walksnail Avatar canopy
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Canopy for Meteor 75 Pro (designed for DJI O4) conversion to Walksnail Avatar 1S VTX
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 69
- Makes
- 0
- Views
- 893
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Public Domain
To make Meteor75 Walksnail version you need (not affiliate links):
- Bare drone (BetaFVP Meteor 74 pro O4) without DJI VTX (https://www.aliexpress.com/item/1005008676522575.html)
- Walksnail Avatar 1S V3 VTX (https://www.aliexpress.com/item/1005009011769847.html)
- Happy model LHCP 5.8 GH antenna (with (https://www.aliexpress.com/item/1005006459921719.html) with short wire and ipex connector
- TPU filament
It is important to properly setup supports for print:

Model must be upside down

Final support must look like:

Do not forget to dry filament before print. Plastic tube on antenna must be carefully cut (shortened) to fit nicely in canopy. Orient VTX like on 4-th photo for best cable management. Mount first screw to fix VTX to drone under camera (front). After that mount another 3 screws to secure canopy to VTX and drone frame.
Total weight of canopy is 2.7 grams:
