Counting matching models…
Many toothpick canopies for a 14mm camera are not suited to the up front bulk of the o4 (lite) camera so I designed this canopy to work with my o4 mount ( https://www.printables.com/model/1147195-dji-o4-lite-14mm-camera-mount ) providing…
Tiny Whoop Build Up STL Objects: Canopy Camera Mount Buzzer Holder E010 Camera Mount Canopy is very thin so removing support is a precise work. I was successful right after print. Some parts of objects are bend after print with a help of…
I broke my Air65 canopy and didn't want to wait for shipping of a new one. I've seen a similar model to this one on the internet for other cameras, and I couldn't find a light weight canopy for the betafpv CO3 camera that I could use, so…
The design is progressing well, having already undergone 250 test flights
This is a recreation of the P-51B Mustang canopy release lever, combined with a mount and dual-action electronic switches, for use in flight simulators. It was designed to mimic, as closely as possible, the size and shape of the original,…
This canopy has been redesigned to accept a Flywoo 40A AIO, as well as a GPS (or a vifly mini buzzer if you prefer)
Compatability: It has only been tested on the 5-inch version; however, it should fit the 4-inch version as well. Check dimensions for compatability with other frames. Dimensions: Canopy outer dimenstions 51x51x19mm Hole spacing…
Many toothpick canopies for a 14mm camera are not suited to the up front bulk of the o4 (lite) camera so I designed this canopy to work with my o4 mount ( https://www.printables.com/model/1147195-dji-o4-lite-14mm-camera-mount ) providing…
Remix von Ceiling Rose Canopy Abzweig-Baldachin von MacNeill von 7cm auf 15cm hochskaliert und mit neuer Bodenplatte zur besseren Montage. Wenn es mal extra groß sein muss.
To make Meteor75 Walksnail version you need (not affiliate links): Bare drone (BetaFVP Meteor 74 pro O4) without DJI VTX (https://www.aliexpress.com/item/1005008676522575.html) Walksnail Avatar 1S V3 VTX…
Top hat for the micron + 180. Camera mounting, and handle holes.
In tinywhoop racing, every last hundredth of a gram counts. But you can't have your camera break in a crash either. You need to find the right balance between durability and weight. That's what the Joker is for. Material: TPU95A. For me,…
I needed a canopy that would protect the dji 04 air/lite for 2s or larger rigs and could take a beating. I've used it In bandos, hit concrete and steel poles and your typical tree. it really works great for toothpicks like the tunerc 3in…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
conception d une canopy pour le cadre fyrelens de flywoo ou meteor pro pour ceux qui veulent faire le lens mod du air unit O4 lite avec une lentille du O3 . percement de 3 trous pour la fication de celle-ci sur n importe cam plat pour O3…
A 30° fixed-angle canopy for the C03 camera with raised design to prevent contact with the flight controller. Features integrated retention straps to secure the camera tightly in place, a protective horn on top, and a rear antenna…
A ceiling light canopy designed to cover the mounting bracket, hook, and electrical connections of ceiling or pendant lamps, providing a clean and professional finish. The design is simple, functional, and easy to print , made to fit most…
This a tweaked version of my M2 Evo canopy that fits both the M1 Evo and the M1 plastic frame version. I have included a canopy with no text on the side too. A small 2s lipo extension is recommended to connect the battery, it can be then…
A camera canopy 3D design to mount GoPro mount style instead of the default smaller mount type. I have 3D printed using TPU but can also be printed with hard materials like PLA/PETG. There is no need for support material.
Kayoumini Canopy for O4 lite with Betafpv's C03 lens mod. Print in TPU
I really liked the Joker canopy on my analog whoops so i remixed them. New versions for the HDzero Eco and HDzero Lux cam. Lightweigt , Eco version printed in tpu95A is 0,7 gr the lux version is a little bit more. Adjustable angles ,…
I designed a new canopy to fit a bigger battery. You will also need a 10x3mm Magnet. Both canopies need the separate hook to be glued in Two Version with VTX mounts for 20x20mm and 30.5x30.5mm mounts.
lens mod: https://youtu.be/rzRayF_7Avs?si=uzwZ8htJeb8kk96V I printed the canopy with 95a tpu (you can use pla supports if you have an ams or toolchanger) I just snipped off the sagging bridges after it was done. Its recommended to glue…
Print in TPU Use 40% infill. Does not require supports or rafts.
Version 1 is simply a widened lens diameter (from 10mm original to 12mm for RCN4). I would recommend this version. It is a very snug fit around the lens. Version 2 is slightly experimental. It has slots cut into the lens mount to enable…
Repurposing old Aquarium equipment, because these bulbs are kind of outdated I couldn't find a ballasting unit that shades from either side in my area I made this canopy to fit 8mm Aluminum Rods that are secured by an M5, and an M4 bolt…
I printed from petg, but it is better to print from smaller filaments (TPU, PC aero, or other aero materials) It doesn't break on impact Suitable for meteor 75 Feel free to leave your feedback!
This is a custom-designed toothpick canopy optimized for 3-inch 1S long-range FPV builds. It is specifically engineered to accommodate a GEPRC Peano antenna and offers dual compatibility for either ELRS or TBS Crossfire T-style antennas.…
Optimized fir Meteor75 Pro, 1.5g only. Printet with tpu95a. No supports needed. https://tressym.eu/parts/joker - original designers, check them out!
Hook to attach a canopy cover to the trailing edge of a glider. With a hole to connect a bunge cord.
needs to be scaled in your slicer to 99% glue them in top side down they snap in mirrored and cloned for all wing parts
Minimal canopy design for the Meteor 75 Pro 04. It allows camera angles of 5 to 30 degrees. Printed out of Nylon, it weighs 1.36g (after paint) and 1.27g (before paint). Cheers!
TPU canopy designed for a 25.5 × 25.5 mm mounting pattern. Compatible with the O4 Lite camera modded with an O3 lens. The lens area have a light interference fit to help hold the camera in place. For additional security, I recommend…
This model is compatible with the lego system.
This is a locking device to keep an open an RV-12 aircraft canopy if a gust of wind tries to close it. The lock fits over the shaft of the gas cylinder to keep the cylinder from closing. Add a "Remove Before Flight" flag using the keyring…
Lamp connection Cover Hexagon with central screw connection, so old plugs can continue to be used directly. The cover is available with one and two cable glands as well as 100x40mm and 70x30mm. Lampen Anschluss Cover Hexagon mit zentraler…
A remix that allows for 1-0-R handles to be left on for a top hat.
The Flite Test Sea Duck is one of my favorite planes but I find the opening in the top rather small and inconvenient. This requires a slight alteration to the plans. I basically hack off the front of the foam board canopy and put this in…
This is a mod for the 3D Printed FJ-4 Fury EDF Jet made by Gnat666 ( https://www.thingiverse.com/thing:5029152 ) The stock canopy is made out of only one line of filament which makes it quite easy to damage and it also has a shape that…
Use this to weigh down or hang items on your canopy or EZ-up when staking it down isn't an option. We often do motorcycle events where we are relegated to “Van Camping” on asphalt and can't stake down the canopy. After having to chase or…
I needed a larger foot for my canopy. This one has a larger hole for the larger pipe I used to make a leg extension.
I have designed canopy for my Moblite6. You can find range of angles 10, 15, 20, 25 deg. There are some variations with holes to lower the weight. They are designed to easily access camera screw. Please leave your like if you appreciate…
Eurmax Pop up Canopy uses plastic bracket for truss joints. This is a replacement design that does not need any supports. Print it standing tall in the longest dimension. All hang overs are 45deg.
This is a replacement for the standard latch on the excalibur. I used a 3mm knurl insert nut in the center. Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: No Supports: Yes Resolution: 200 Infill: 25% Category: R/C Vehicles
Tiny whoop camera mount and canopy made for E010 frame and this camera module (AKK A5): https://www.amazon.com/gp/product/B073WV3HLS/ref=oh\_aui\_detailpage\_o03\_s00?ie=UTF8&psc=1 Category: R/C Vehicles
Update 04.01.2025 Updated Normal version to V22: Improved Antenna Holder hole sizes to better fit the HDzero AIO5 Linear antenna Removed holes that were scattered over the whole design at the cost of +0.02g weight to improve durability…
Hi! Orginal ~25* angle on Air65 was way to much for me, so I remixed Max_Debaz's ( https://www.thingiverse.com/thing:6428614 ) design. It's possible to get 0* on this desing. (Pls ignore great quality of print, I'm still waiting for…
A holder/mounting plate for a 10 cm lamp canopy/rose. Adapted original design by moWerk, because canopy was different.
I broke my Air65 canopy and didn't want to wait for shipping of a new one. I've seen a similar model to this one on the internet for other cameras, and I couldn't find a light weight canopy for the betafpv CO3 camera that I could use, so…
Based on my design for the eco camera, I developed the lux version as well. Please let me know if you'd like more angles and any modifications. Link to the eco version:…
Steam Ak400 / Ak420 Pro Canopy Auto + Manual tree support,brim are REQUIRED
That's my variant of the original canopy. I've added holder for 2 antennas and a GPS. Printed in TPU, will see how it holds. GPS used: Foxeer M10Q-120 ← this is my go to for small quads. Amazing performance.…
I needed to adapt the Canopy Desk Accessory Stand to fit an old broomstick with a 24mm diameter. I figured that I might as well go parametric and share the result. Key Parameters: In this section you will find an explanation on what are…
This is a Ceiling Canopy and Cable Clamp for a Ceiling mounted Lamp. The original one broke so I made one myself. Use the clamp if the cable is smaller than the hole in the canopy and will not be hold in place by friction.
Printed with PLA (0,2mm SPEED) with 5% Cubic infill. Canopy has place for a magnet, same as original, but can be also fastened using a velcro.
A Canopy for Runcam nano 4 A canopy for runcam nano 4 camera designed for standard 65mm whoops. Although it should fit any frame which has 25mm square mounting pattern. The model itself has a camera angle of 40°, but it can be changed in…
Designed to be easy to print with no supports or brim. Print at 90-100% infill with PLA+. You'll want the gummies in your unit. I found the easiest way was to use fine point tweezers to start them in the holes and then your fingers to…
Raises the canopy above the board, should help reduce stress fracture on the vtx or aio5 boards. The camera cage is based on my previous designs and keeps the weight low while giving some protection to the camera. the canopy comes in at…
Raises the eco cam canopy above the board, should help reduce stress fracture on the vtx or aio5 boards. The camera cage is based on my previous designs and keeps the weight low while giving some protection to the camera. The canopy comes…
The design is progressing well, having already undergone 250 test flights
I like Exerqtor's concept, but I wanted a simplified version. The functional changes are to not use the UM2 style connector and instead have an opening that has a 50 mm radius to avoid pinching the tube, and no bearing. Note that the…
For those that use the canopy in my other files or some other variant with similar middle (will work 250, 300, or 350), this mount will allow you to attach your ERCF v2 on top. There is a new End Bypass with channels to run wiring under…
This is a recreation of the P-51B Mustang canopy release lever, combined with a mount and dual-action electronic switches, for use in flight simulators. It was designed to mimic, as closely as possible, the size and shape of the original,…
Previous canopy's all smashed the cam into the AIO. Was seeing the briBrain for the analog build so modded them for hdzero. And made a version that fits the lux cam.
Remix from “ Air65 Canopy (low angle) ” by raNn . Une nouvelle canopy à imprimer en TPU pour le BetaFPV AIR65 : Incassable Permet des tilts beaucoup plus bas Attention : Ce n'est pas indispensable, mais une impression “dur” facilitera les…
A canopy for the Ldarc 199c camera. It is raised to help reduce impacts on the flight controller and hopefully last a bit longer due to crashes. If more angles are needed please let me know and I will model it up. Update: thickened up the…
So you wanted a place to put your 5in screen up higher or your Voron 2.4. Now you can if you have my Voron 2.4 Canopy. Will need a BTT HDMI5 V1.2 with the cables coming out the back. You will also have to remove the speaker on the back by…
This canopy has been redesigned to accept a Flywoo 40A AIO, as well as a GPS (or a vifly mini buzzer if you prefer)
This is a recreation of the feet to our Temu Canopy. There is an added a spike to the bottom part, but it can be left out. I designed it to be able to be glued together, I'd suggest some type of epoxy. I haven't printed yet. This is the…
Description : This is a canopy for the DJI O3 Air unit Naked. The camera is naked (without the frame from flywoo). The antenna are from the naked' kit from flywoo :…
This is item #609600 from STOKKE®, the owner of the Babyzen Yoyo stroller line. One must have fallen out randomly and I reached out to them. $14 + $10 shipping + tax for these 2 tiny plastic items, so I decided to learn TinkerCAD and make…
This tiny bit of plastic lets you decrease the tilt you can apply to the camera on the Air65 and Air75. This lets you fly slower and still see straight ahead. Weights under 0.1g, which is probably less than most of the other solutions…
LDARC 199c camera mount The design combines the idea of portofpv 's Ldarc 199c camera whoop canopy and brighfive's Bribrain LowRider version requested by the legendary TDog. Neither models were used as references. Features: Available…
OMPHobby M4/M4 MAX Canopy Mounting Post OSHM4025
Classic cone shaped canopy. A M6x10 mm polyamid flat headless screw is needed to clamp the canopy to the cable. To cut the thread I’ve been using a thread cutter or simply a new M6 screw. PLA, 0.3 mm with variable layer heights. Print…
I printed mine out of PLA, but I would recommend TPU. It mounts the camera at a 35-degree angle. It mounts on top of the U.FL socket to hold it down, as I found it would always come out with the stock design.
Extension of the original model (12 cm version) with 3 new remixes: ceiling rose / canopy with 3 holes , where one canopy is then common for 3 lamps ceiling rose / canopy with 3 holes, however the holes are enlarged so that the original…
It was one of the first attempts. I highly recommend to use this instead: https://www.printables.com/model/1132751-c03-camera-holder-for-old-mobula6-canopy Tall version is for the option with more angle.
Mounting points and angle reinforcement for a canopy support for a cradle
A simple Ball Canopy design for my 3" Toothpick.. It's for 14x14mm (nano) FPV cam... You can put a LED insid of it to get a great effect... Print it on TPU for better results.. Updated on 06/01/2020: Added a 19x19mm Version Category: Hobby
Canopy para tiny whoop Mobula 6 en filamento flexible TPU en diferentes diseños con orejas, tiburón y simple. Especificaciones: Para imprimir de manera adecuada el filamento flexible TPU, se recomienda usar una impresora 3D de extrusor…
Designed to mount my new Nocturne USB camera from Luke's lab. The camera back plate with GoPro mount is provided on their printable's account. https://www.printables.com/model/305428-usb-camera-housing With LED strips and nozzle brush…
A little Stylish rework of the canopy for the caddx ant (i actually redesigned it from the ground up, but i made it to be the same shape) with some slots to be colored with nail polish. that is a bonus if you care for color matching your…
This is a cosmetic item for Van's RV-12 aircraft that covers the exposed nylok nuts that attach the canopy frame to the canopy. These are designed to fir over the nut and washer and can be retained with a dab of adhesive. If you have the…
Camera pushed fwd to get props out of view. Mounting: 25x25mm Support my work: All of my models are available for free. If you'd like to show your appreciation, consider Buying Me A Coffee. Filament: TPU Remix of Flywoo original canopy.
Uses Phoenix-Prints' design: https://makerworld.com/en/models/938312#profileId-903531 Needs a lot of supports, organic are not too annoying to remove. Version on pictures is 30 degrees. UPD: I've been using it almost daily for months now…
Compatability: It has only been tested on the 5-inch version; however, it should fit the 4-inch version as well. Check dimensions for compatability with other frames. Dimensions: Canopy outer dimenstions 51x51x19mm Hole spacing…
English below: Hier eine einfache Abdeckung für Decken Lampen. Ein sogenannter Baldachin. Er ist für 5mm Kabel vorgelocht, kann aber weiter aufgebohrt werden. Innen ist eine 10mm Verstärkung. Here is a simple cover for ceiling lamps. A…
Material according to the location of the reader. Ideally ASA, but PETG or PLA is also possible. Printing without supports. Installation together with the metal base of the reader.
![LDARC 199c camera mount/canopy [Improved Complete Set]](https://media.printables.com/media/prints/1089826/images/8240087_f5ea21c9-cc99-4c88-b377-27dd47de81bd_77c93d49-2772-411d-9618-7d15c3e6d807/screenshot-2024-11-28-180746.png)
