Ceiling Rose / Lamp Canopy | Lamp Mounting Plate (Lampenbaldachin)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€3.04 – €3.72 net (excluding VAT)
For file: lamp-ceiling-mount-12cm_0.4n_0.2mm_PETG_MK4_3h2m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.38 excluding VAT (range midpoint).
- Weight reported by the author
- 53 g
- Print time reported by the author
- 3.04 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Low-profile canopy system with universal fitting bracket and minimalist design.
- Rating
- 5 / 5
- Likes
- 59
- Downloads
- 322
- Makes
- 5
- Views
- 1,876
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A versatile, low-profile ceiling canopy system with a height of only 3 cm, suitable for various mounting situations.
In case you only look for a holder for your existing canopy, also check the @mikhart remix for 10cm canopys
Available Sizes:
- 10 cm canopy: Ideal for heavy lamps with a reinforced bracket.
- 12 cm canopy: Covers large holes or wide screw distances up to 9 cm.
Features:
- Bracket adapts to various ceiling electrical boxes and mounting situations.
- Standard 5 mm diameter lamp cable is perfectly centered and secured by a tensioner screw.
- KirillAnufri_1455552 has made a good looking remix of the nut you should check out as option.
- A 3 wire outlet option has been remixed by @michalp
- @toastfr35_96071 has made a taller variation remix of the canopy.
Material Needed:
- 2x M3 inserts
- 2x M3x6 (or longer) terminal screws
- 2x Screws and dowels suitable for your ceiling
Assembly Instructions:
Prepare Bracket:
- If using thick screws, drill larger holes in the bracket to accommodate them.
- Mark the screw locations on the ceiling or electrical box.
- Drill the appropriate holes in the bracket based on your markings.
- Heat up a soldering iron to insert M3 inserts into the bracket’s recesses. Alternatively, use screws with threads large enough to cut into the M3 recess.
The bracket in the 3 wire remix by @michalp is optimized to work without M3 inserts.
Attach Cable Tensioner:
- Insert the tensioner screw into the canopy, with threading facing outwards.
- Slide the tension nut over the cable, thread facing the ceiling.
- Push the cable through the tensioner threading and the canopy.
Position Bracket:
- Push the cable through the bracket's center hole with the flat side of the bracket facing the ceiling.
- Estimate the desired lamp height and adjust the cable length accordingly.
- Secure the cable by pushing it through the other two holes, creating friction to hold the lamp. Use both holes for better stability.
Mount Bracket and Canopy:
- Secure the bracket to the ceiling or electrical box.
- Push the canopy up to the ceiling and attach it to the bracket.
- Straighten the cable and fix it using the nut, adjusting the tensioner screw if necessary to ensure a secure fit.