1 / 9
Ceiling Rose / Lamp Canopy | Lamp Mounting Plate (Lampenbaldachin)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Low-profile canopy system with universal fitting bracket and minimalist design.
- Ocena
- 5 / 5
- Polubienia
- 59
- Pobrania
- 319
- Wydruki
- 5
- Wyświetlenia
- 1864
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (12)Wydruki i komentarze (Wydruki: 5) (Komentarze: 12)Remiksy (7)Kolekcje (90)Powiązane
A versatile, low-profile ceiling canopy system with a height of only 3 cm, suitable for various mounting situations.
In case you only look for a holder for your existing canopy, also check the @mikhart remix for 10cm canopys
Available Sizes:
- 10 cm canopy: Ideal for heavy lamps with a reinforced bracket.
- 12 cm canopy: Covers large holes or wide screw distances up to 9 cm.
Features:
- Bracket adapts to various ceiling electrical boxes and mounting situations.
- Standard 5 mm diameter lamp cable is perfectly centered and secured by a tensioner screw.
- KirillAnufri_1455552 has made a good looking remix of the nut you should check out as option.
- A 3 wire outlet option has been remixed by @michalp
- @toastfr35_96071 has made a taller variation remix of the canopy.
Material Needed:
- 2x M3 inserts
- 2x M3x6 (or longer) terminal screws
- 2x Screws and dowels suitable for your ceiling
Assembly Instructions:
Prepare Bracket:
- If using thick screws, drill larger holes in the bracket to accommodate them.
- Mark the screw locations on the ceiling or electrical box.
- Drill the appropriate holes in the bracket based on your markings.
- Heat up a soldering iron to insert M3 inserts into the bracket’s recesses. Alternatively, use screws with threads large enough to cut into the M3 recess.
The bracket in the 3 wire remix by @michalp is optimized to work without M3 inserts.
Attach Cable Tensioner:
- Insert the tensioner screw into the canopy, with threading facing outwards.
- Slide the tension nut over the cable, thread facing the ceiling.
- Push the cable through the tensioner threading and the canopy.
Position Bracket:
- Push the cable through the bracket's center hole with the flat side of the bracket facing the ceiling.
- Estimate the desired lamp height and adjust the cable length accordingly.
- Secure the cable by pushing it through the other two holes, creating friction to hold the lamp. Use both holes for better stability.
Mount Bracket and Canopy:
- Secure the bracket to the ceiling or electrical box.
- Push the canopy up to the ceiling and attach it to the bracket.
- Straighten the cable and fix it using the nut, adjusting the tensioner screw if necessary to ensure a secure fit.