CANOPY - BetaFPV Meteor75 Pro Runcam TBS nano 32 VTX - CANOPY
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Canopy to fit a runcam racer nano 2 with a TBS nano 32 VTX onto a Meteor75 Pro Frame 5.xish grams. no supports.
- Rating
- 5 / 5
- Likes
- 40
- Downloads
- 444
- Makes
- 1
- Views
- 3,642
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed a canopy to fit a Runcam and TBS nano VTX onto my Meteor75 Pro Frame.
It closes with the help of 1-2 Zippies, velcro cable ties or glue or string or anything else.
==> NO ZIP-TIES ON PREVIEW PICTURE!!!
The VTX antenna is supported by the frame (currently I have a shorter one installed).
The VTX is held in place by the top half of the canopy OR a zippy-tie. => you could leave the top half away and spare some grams.
It prints: WITHOUT SUPPORTS but with a small skirt - see the .3mf for details
Printed in PETG. Variable Layer Height is ON => Adaptive and basic config
The STL included is only for preview. Not for print. Use the .3mf instead.
Have fun and happy whooping!