591 models
I was looking for a carrying case for my BetaFPV Meteor 75 Pro FPV Quadcopter that holdes my drone as well as accessories like batteries, charger, tools, props and a powerbank. Since this is very specific, I didn't find anything out there…
Print approx. €6.52–€7.96 excl. taxPreliminary estimate for one variant
Printing Notes: I reduced the perimeters from 3 to 2 to make the text look better. Printed at 0.10mm height. Filament used: Overture Matte Pink PLA Post print additional work: I filled in the lettering with the some nail polish. Make sure…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
A box for storing a VIFLY WhoopStore 1s LiPo charger (https://www.viflydrone.com/whoopstor.html) together with a short cable (the included USB-C cable or similar). The lid comes in two versions, with and without text ("VIFLY WhoopStor")…
Print approx. €3.34–€4.09 excl. taxPreliminary estimate for one variant
This is a case/holder for a DIY LED tinywhoop gate. It's running a WS2812B LED strip controlled by an Arduino board. Due to the design, the case will also hold the gate upright. Nothing else needed. These things are pretty light though.…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
Racing Gate Stand for Tiny Whoops and Micro Drones Features: Minimalistic small form factor Base Dimensions: 20mm * 150mm Clip Depth: 19.5±2mm Print Settings Printer: Creality Ender 3 Filament material: PLA Resolution: Default or finer…
Print approx. €1.24–€1.51 excl. taxPreliminary estimate for one variant
Designed for multi-material printers. Help support my design work by visiting my referral links: Upland referral (virtual property trading game): https://r.upland.me/qk9X Unstoppable Domains referral:…
Print approx. €12.92–€15.79 excl. taxPreliminary estimate for one variant
1.13g cover for inverted (pucher moded) tinywhoops main boards. (Designed for Betafpv meteor 65 but it should fit to most brushless tinywhoops) printed on I3 MK3s+
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Simple GoPro mount for the iFlight BumbleBee Cinewhoop. Made with PLA/PLA+.
Print approx. €1.29–€1.57 excl. taxPreliminary estimate for one variant
This is my WIP third generation tri-loop or tri-blade design which improves upon the second by following more traditional rules of propeller blade design whilst also reducing weight at the outer edge, (hopefully) improving prop response.…
This is a canopy for the BetaFPV Air Tinywhoops, like the Air65 and Air75. The longer tail section allows a lower camera angle to be set. I also made a widening in the area of the right holder to additionally fix the antenna connector. I…
Reach me on social medias for questions, news and support [ Instagram ] [ Facebook ] [ YouTube ] If you like my work you can [ support me via ko-fi ] ------ Check those accessories for the PickleWhoop by Milo Perriand (Full GoPro mount,…
IGNORE this version, we're onto V3 already! Watching the video should explain it all, but basically I'm attempting to further develop upon MIT Lincoln Lab's toroidal propeller concept by offering up my design for anyone in the FPV drone…
Some whoops that can be made as long or short as you want them to be. The ends are reversible, and you can add as many middle sections between them as you need. They have holes to add the connectors in to help keep the pieces from moving…
Print in TPU, organic tree supports. I weighed it at 1.7g. There's room to make it lighter for sure, but I also want it durable. Feel free to give me feedback!
Case for the BetaFPV Air65 TinyWhoop
If you like this model, please consider a donation: Buy me a coffee link Print Settings Layer Height: 0.2 Wall Line Count: 4 Top/Bottom Layers: 5 Infill: 100% Other Parts: 8520 Brushed Motors Flight Controller (Mount was designed for…
Just a simple 65mm Tiny whoop frame, planning on building more versions that are more robust and lightweight versions
Just a simple 75mm Tiny whoop frame
Features Fully customisable to suit any diameter of PVC pipe and to suit your own printer tolerances. Accurately calculates the length you need to cut your PVC pipe to in order to achieve a specific dimension (see OpenSCAD console…
-------------------------------------- V3.1 IS HERE--------------------------------------- C hangelog: [2024/12/31] - v3.1 partial upgrade Improved power input cutout fitment Improved exhaust fan cutout Reduced pusher gap Increased width…
More info here for kits and BNF Print the cam holders in TPU, 0.3mm height, 0.48mm width. F75 Pro Max Ducts: Experimental, print at your own risk 😛 Print in PETG, PA or HIPS; any high impact plastic should do. Then insert the struts into…
Someone in the comments mentioned that original canopy is too thin for TPU so I added 0.5mm thickness for it
I wanted to have a neat way to display and store my drones on my shelf, but i wanted it to be modular and easy to print. I tried to find something fitting online, but couldn't find anything that really met my expectations, so i hopped…
I tried to design an indestructible frame taking advantage of Prusa XL multi material print capabilities. My configuration: LIPO: 2S 450mah FC: Flywoo GOKU F405 HD 1-2S ELR AIO V2 Motors: HGLRC SPECTRE 1202.5 Motore Brushless 11000KV…
Tired of snapping carbon fiber arms or cracking rigid plastic frames during basement laps or sidewalk proximity flying? This 75mm micro frame is designed specifically for durability and flexibility, utilizing the unique properties of TPU…
Optimised for printing with a .4 nozzle with a line width of 0.4 in PETG (Dry). Any layer height should be fine, I used 0.28. The adapters should be a snug fit and slide in without a lot of force, if they are too tight or too loose try…
In case somebody needs a 3d model of mob7 frame for making custom canopy or whatever. The model is accurate to the production frame except symmetrical motor arms and straight duct profile.
Prop guard for your 5 inch :) Holes on the sides, if you want to add rigidity by printing connecting rods. Mirror to get the other side. Some frames have the motor mount holes angled relative to the frame, if so let me know. Category: R/C…
Required parts: Sim Removal Tool (What I used) https://www.amazon.com/dp/B099ZHQZ2F?psc=1&ref=ppx_yo2ov_dt_b_product_details https://www.amazon.com/MMOBIEL-Card-Removal-Smartphones-Ejector/dp/B097RDGRR2…
Reach me on social medias for questions, news and support [ Instagram ] [ Facebook ] [ YouTube ] If you like my work you can [ support me via ko-fi ] ------ Updates 2026/09/14 : added frame STEP files + DJI O4 Wide cam mount 2025/01/16 :…
Print your own Tiny Whoop Gates! I hope this serves you well and feel free to give me any feedback or ideas for improvements. Have fun! Main loop This split into several parts (e.g. 4 or 6). These are just stuck together and hold well.…
the camera mount from the five33 whoop These mounts are designed and used by Team BlueEyes in the Italian Whoop League 30 deg 35 deg 37 deg 40 deg print settings: infill: 100% use tree supports fillament: tpu .2 layer also on thingiverse:…
THIS IS A 65mm MICRO WITH 40mm PROPS THAT WEIGHS 21g AWG!!!!!!!!!!!!! Back in the day when Tiny Whoops hit the market the average weight was around 21-22g with brushed motors and 31mm props. It's crazy to think in just a few years we can…
This project was actually just for fun....but it ended up flying (unexpectedly) very well. All you need additionally are 14 pieces of m3 18mm nylon standoffs. My Configuration: Stack (20x20): Mamba F405 MINI MK2 + F30A, AKK FX3-Ultimate +…
Made those two versions for my whoops to be able to just toss them in my FPV backpack. The 65mm version requires 6x M3x20mm screws. The 75mm version requires 6x M3x30mm screws. The parts called multipart are STLs with multiple bodies in…
This is a strong and light Tiny Whoop style (25.5 x 25.5 mounting) canopy specifically deigned to accept: HDZero - Nano camera (also other 14mm nano style cameras) Happymodel - ELRS PP / EP2 receivers (the RX fits behind the camera on a…
I'm not a massive fan of using rubber bands to hold batteries on toothpicks so I design a folding battery holder for 1s batteries. It can fit small batteries like 300mah square shape or the larger 450mah+ rectangle batteries. It fits…
this is a toroidal prop for tiny whoops like the eachine e010 that use a 30mm prop and 0.5mm motor shaft after testing the hole is to small to be properly printed will update the size soon
In tinywhoop racing, every last hundredth of a gram counts. But you can't have your camera break in a crash either. You need to find the right balance between durability and weight. That's what the Joker is for. Material: TPU95A. For me,…
Content : These are the STL files of the differents parts of the frame. Be careful, all the parts are not made of the same material (see Print Settings). There are 3 version of the bottom frame : 20x20 M2 = use for ESC / FC with M2 screw…
I designed this part to fit my DJI O3 Air Unit. As you can see on the pictures the big ass box fits right behind the cam. I used double sided sandwich tape in-between to stick it to the upper frame part and secured it with a zip tie. I…
Printet in 98A TPU, tested OK with both 0.15 an 0.20 layer height. Without the bottom plate it comes out lighter than the one delivered with Moblite 7 HD :)
I needed a quick and simple way to connect lengths of PVC pipe together without buying expensive connectors. In my case DIN EN 61386-21 with an outer diameter of 20mm Printtips The files print without support and should be correctly…
Say hello to never buying another propeller guard for your cinewhoop :) Update 19.05.2024.: See the upgraded, better version here: https://www.printables.com/model/884159-unbreakable-propeller-guard-for-cinewhoops-upgrade A little back…
Store up to 4 standard size 65mm whoops (or 5, it's possible to slide one more into the center). Includes an additional compartment with optional insert to separate batteries into two groups. This compartment can also be used to store…
Designed for the hdzero eco camera it will also work with the analog pinch cam. Weighing in at 0.68g this is one of the lightest whoop canopies you can use that actually protects the camera, (your weight can vary on the type of tpu, your…
Note : I made this frame as a prove of concept and to see if it was possible, not because it will work well. You can build a flying drone with it but if you want to build and actual fly a tiny whoop, joust get a real, injection molded…
IGNORE this version, we're onto V3 already! These have since been superseded by my second generation design , but for posterity I'm uploading it here so we can see how terrible they are compared to the newer ones. Also, here's the first…
Enhanced Fastback Canopy for TinyWhoops: This version offers additional mount points and is optimized for weight reduction compared to its predecessor. I advise using the 4.1 variant; the ELRS tray in the 4.0 model isn't effective and…
Mobula6 / Meteor65 compatible frame. Print in PLA, PETG might work but found mine to flex too much. Print slow, will make it stronger. After printing break the supports under the ducts and FC mounts. You might need to re-drill holes on…
Fully printable tiny whoop racing drone. Smallest possible frame wheelbase is 65 mm but with 40mm props. Bumper size is 92mm. Hardware: -Zeus 5 FR (spi rx REDPINE) (has Blackbox) -Zeus 5 Wifi version with no Rx (for my crosfire version)…
My 4 inch drone whoop frame. Suitable for normal 5" drone parts with 30.5x30.5 stack.
Camera mounts for: Tiny Whoop FX965TW Pitch (11mm x 11mm) Foxeer Pico (12mm x 12mm) Caddx Ant (14mm x 14mm) FPVCycle 199C (12mm x 14mm) I've printed the 30 degree mounts without supports. The top bridge is the hardest, it may need to be…
I like the whoop canopy made by happymodel and also saw that rotor riot develop a tpu version for their vision whoop, but I don't like how heavy it is. So I created my own version which weighs less and protects hdzero v3 cams better. Some…
After a year of use of my original design I refined it to make the outer ring more flexible but the inner part more rigid and durable. I also shaved off 3 grams! Let me know your experience with these parts in the makes & comments…
Tired of the same old whoop frames breaking? Whatever your poison 1s or 2s, this should fit the bill. Yet Another rendition of my past designs. An actual whoop 64mm size with 31mm props and the latest brushless motors along with all the…
This is my remix/take on the Canopy used by Mr Shutterbug in his Emuflight DAS video. He stated that he used a model that was remixed by marblekit from a design by DaveC. I found that the camera angle was way too high for my liking and so…
This is the Basher. It is an easy to print tiny whoop frame for the larger 716 coreless motors. The battery is held with rubber bands. Optimized for 0.6mm nozzles. No supports needed. There are 2 versions to choose from: whoop: weight is…
Made for Mobula7, likely suitable for most 75mm Tiny Whoop drones. YMMW
Hard Case for Tiny Whoops Features: Protection - hard case (PLA/PETG) for 65mm tiny whoops Ergonomics - rounded edges with no corners, no more cuts during winter seasons Ease of use - the lid featured pull tab flanges for easier access…
This is my attempt to make a traveling box / case for the BetaFPV Meteor75 Pro. Lid_V2 comes with round handles to make opening easier. Printing instructions still apply. Works with V1 box Box_V2 updated to have keying for V2 lid.…
I created these Whoop frames specifically for the Tiny Whoop Nano FC. UPDATE: Made quite a few changes and am pleased to say I am happy with the final result. I designed the 65mm frame as I felt the 55mm was getting too much washout for…
Here's a stand I made to help me calibrate my accelerometer on my 75mm frame whoop frames. Tested on the following -King Kong (LDARC) Tiny 7 -Crazy Pony Frame -Boldclash B06 -Mobula7 HD -Trashcan
Simple adaptor for mounting a whoop stack to a 20x20 mount, can be reversed to do the opposite. I will be using it to mount a happymodel diamond dvr vtx to a 20x20 mount. Holes should be tight enough for the screws to bite, so nuts…
1mm wall thickness Can be printed in PLA or PETG with some overhang artifacts, that noone will ever see 😇 TPU might work as well, but won't be as protective for the lens. Suitable for Foxeer Toothless2 nano (Starlight) camera (14 mm wide,…
This is my take on a tiny whoop canopy designed to accommodate the Flywoo O4 Wide camera. This is currently being used by FPV Manitoba ( https://www.instagram.com/fpvmanitoba/ ) for tiny whoop commercial shoots. It’s a derivative of my…
What's better than a battery case? A battery BRICK. These battery cases are intended to be printed in TPU and sized for for 300mAh ‘stick’ style tiny whoop batteries. I recently replaced all my rolled cell BetaFPV 300mAh lipos with the…
Tiny whoop canopy. For the runcam nano3 , flywoo nano and foxeer pico , the betafpv c03 and the ant lite. v2 is lightweigt race , v3 is freestyle low angle. They are adjustable withe the extra mounting hole.
1S LiPo Storage and Charging Case for up to 30 LiPos. Optimized for the ViFly WhoopStor 3 Charger. Includes a Lid to close it, but I never use it myself. You are fine just using the charging case by itself to organize your LiPos.
Based on the model posted by MrShutterBug on Thingiverse.
I designed this frame to replace a beta95x v3 frame which is quite specific and not very suitable for the parts I mounted on it. Moreover, this frame was not rigid and flew very badly. So I designed this fully 3D printable frame. It is a…
I've always wanted to make a printed brushless whoop frame but I was never quite successful. I got inspired again, mainly due to the fact that I was out of frames and no local shop had stock. So after a few weeks of testing, I'm finally…
75mm Tiny Whoop Hard Case Air75. This is a remix of spectrexFPV Whoop case to fit betafpv air75 and other similar drones
Previous canopy's all smashed the cam into the AIO. Was seeing the briBrain for the analog build so modded them for hdzero. And made a version that fits the lux cam.
Instructions for printing: for bambu studio or other Slic3r slicer just open the 3mf file to change your printer and fillament settings for other slicers the scale factor for the og parts is 90.16% I used 15% infill with 2 wall loops…
Canopy para tiny whoop Mobula 6 en filamento flexible TPU en diferentes diseños con orejas, tiburón y simple. Especificaciones: Para imprimir de manera adecuada el filamento flexible TPU, se recomienda usar una impresora 3D de extrusor…
Companion project to my other parametric configurable FPV designs: Pod | O4 | Frame Whoop Action2 , 3-5 AcePro GoPro Mini Hero 9-12 Antenna Mount Add the best 9g video system to your Tiny Whoop! I've fully modeled the field-of-view (FOV)…
This whoop is based on Rygar1432's idea, but i designed the model from scratch. FC is secured by the (included) rubber spacers on a separate nylon screws. This reduced a lot of noise coming from the motors into the FC and increased flight…
Update 19.05.2024.: I upgraded the propeller guards further. Rigid on the inside and flexible on the outside. And 3 grams lighter! https://www.printables.com/model/884159-unbreakable-propeller-guard-for-cinewhoops-upgrade Update…
65mm Whoop Case remixed to be more compact for traveling. Stores 65mm Whoop, up to 28 - 1s lipos, and the ViFly Whoopstor Charger Storage space under charger for spare parts. Remixed to be more compact for travel. 2 tops for different…
Tinywhoop wall mount for 65mm or 75mm (maybe 85mm too). Since tinywhoops are so light, this can be mounted on the wall with just BluTack. Of course you can use 3M or other double sided tape as well for a more secure mounting. Print in any…
2/2/22 - I've added two .3mf files which contain my complete printer settings for printing the frame in Taulman Glass Alloy, and XT-CF20. As well, there are two .3mf files containing my settings for printing the canopy in TPU, and PCTPE.…
Corner x6 Type of corner / connector allowing to build a number of bespoke gates for Whoop Drone Racing. Fits 20mm or 22mm PCV tube (either scaled print or finishing is required).
I designed this for my Air65 but it should work with other brands. I have weighed the frame at 2.6g which is the same as the oem air65 frame. I recommend printing slowly in PLA with default 0.2mm layer height profile and Arachne wall…
Those boxes will carry your tiny (or larger) batteries with style! No hardware required – simply insert a piece of filament in the hinge holes . Print with 0.2mm layers, 0.45 line width (or Arachne wall generator). I printed mine out of…
I love to fly Tiny/Cine Whoops and the small lipo batteries can easily get damaged or lost when not in use. These have been handy and quite rugged! There are options for 1 - 3s sizes. I will be adding more variants as well. I printed them…
This includes my parts for this amazing project called The Picklewhoop Frames (20, 25 & 30). Here we have: GoPro Mount for Naked's SMA Antenna with Diversity Mini Immortal T Mount (8 & 10mm heights) Tube Antenna with Diversity Mini…
Camera Mount for Tinywhoop Racing 15 - 55 degree tilt McStinkyHDZ is for the HDzero Nano Lite, there are also spacer files to raise the mounting point above the vtx board. TheMcStinky is for cameras with a 10mm lens and 12mm body, like…
SMR BOX FOR WHOOP for assembly use: 2 TBHC M3x40 screws to fix the handle, and for the cover and its fixings 4 TBHC M3x30 screws for print : PLA+, 10% gyroide 2 colors option : see BOX FULL TOP SMR v3 bicolor.3mf
This is a 75mm whoop frame I designed to replace me broken mobula 7 frame. Honestly, I have never tried it because I had a spare non-printed frame, so I would enjoy some feedback if it works well. Category: R/C Vehicles
Meet the P.E.P.85 3D Printed Whoop. A Place for Extra Parts :) If you're learning to fly whoops you probably crash a lot. I sure do. Whoops have gotten so cheap that it's often more economical to just buy a new bird instead of continually…
I made this drone to be 3D printable by anyone, who is interested in cinewhoop design. All the source files (Fusion360,.step, .stl, .3mf, .step, .dwg) are available for download. Feel free to comment or remix to make this project even…
I really liked the lower portion of the WhoopDegen Case designed/remixed by Jron2008 on thingiverse, but was not a fan of the outer box/hinge design, the large screw holes not matching the screw size and needing nuts, and the wasted space…
WARNING: you MUST carefully work on your betaflight filters before flying this drone, otherwise you may burn your ESCs and/or your motors, it happened to me :'( The stock configuration created a strong frame resonance at 122Hz in my case,…
Simple and durable frame for 8520 brushed motors. In replacement of the original LDARC Tiny R7. Print Settings Printer Brand: Creality Printer: Ender 3 Resolution: 0.16 Category: Hobby
Adapted Nerdcopter's design for HDZero ECO cam Category: Other
20x20 To 25x25 Whoop Mount Adapter. One is centered and one is offset. Print Settings Printer Brand: Prusa Printer: I3 MK3S Supports: Yes Infill: 20 Filament: any PLA any Category: R/C Vehicles
The Runcam Nano 3 bracket is the same as the one used with the Mobula Canopy which attaches to the back of the Nano's backside and is attached to the canopy via 2 screws. Normally, you would print this in a rigid filament such as PLA. The…
Canopy for Toothpick or whoop style quadcopter. Supports 14mm camera Category: R/C Vehicles
*** V2 with added AIO protection *** V2 optimized for BetaFPV C03 camera (still less then 0.6g) with the same low camera angle. New “skirt” to protect AIO components under camera for increased protection (see in 3rd and 4th pics below).…
![Tiny Whoop Hard Cases [Complete Set]](https://media.printables.com/media/prints/746921/images/8814396_2efa2f15-2f12-4a3b-a177-4fc4a9dbd05d_413de0fe-8cb0-4bf7-ae8f-938e6697a0bf/screenshot-2025-01-30-143834.png)
![Whoop Canopies [Runcam Nano 3, Foxeer Razer Pico, LDARC 199c V2.1]](https://media.printables.com/media/prints/718854/images/5633831_f9da0373-86ba-4a2a-8cc0-a167cd379ce7_7d37e095-6d70-48f4-84f4-b76dca1d038a/0cc2f545-c5c3-4511-b0b0-b53453a8318f.jpg)
