1 / 10
Tiny Whoop Hard Cases [Complete Set]
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hard Case for 65-85mm Tiny Whoops, even though I don't count 85mm as tiny whoops ;P
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 238
- Makes
- 2
- Views
- 1,371
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
Hard Case for Tiny Whoops
Features:
- Protection - hard case (PLA/PETG) for 65mm tiny whoops
- Ergonomics - rounded edges with no corners, no more cuts during winter seasons
- Ease of use - the lid featured pull tab flanges for easier access
- Minimalistic - very slimmed down for portability, there are many cases with battery holder and spare props features but they are often waaay too bulky!
Changelog:
- [01/02/2024]
- The canopy bump has now been widened with the frame height increased
- [10/01/2025]
- Replaced the entire set with updated geometry for better lid fitment
- [29/01/2025]
- Added 65P, 75, 75P and 85 sizes
- [30/01/2025]
- Updated Print Files
Note:
- Combined - Main and Lid are in a single stl file, use "split to objects" function in your slicer to separate them
- Tiny_Whoop_Case_All.3mf contains 15 plates, with both combined and separated models on each plate.
Print Settings
- Filament material: PLA/PETG/Other rigid materials
- Layer height: Default or finer
- Wall Ordering: Outside to Inside
- Supports: Optional for the main case; Mandatory for the lid
- Infill: 20%
- Infill Pattern: Hexagonal/Tri-Hexagonal
- Nozzle Temp: 210-225°C
- Bed Temp: 55-65°C
- Print Speed: >100mm/s
- Rafts: Doesn't Matter
- Notes: Lay the main case on its rear and the lid on its flat surface,