1 / 5
Cinedrony v1.1 - home made cinewhoop 4k — image 1
1 / 5

Cinedrony v1.1 - home made cinewhoop 4k

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

3-inch FPV Drone. Remove the prop guards to get a freestyle drone! Can lift a 4k gopro-like camera.

Rating
5 / 5
Likes
45
Downloads
148
Makes
1
Views
1,661
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

WARNING: you MUST carefully work on your betaflight filters before flying this drone, otherwise you may burn your ESCs and/or your motors, it happened to me :'(

The stock configuration created a strong frame resonance at 122Hz in my case, causing the motors and ESCs to overheat. I suppose this is because the frame is less stiff than typical carbon fiber frames.

Here are my suggested Betaflight configurator / PID tuning / Filter settings:

  • lower “Gyro Filter Multiplier” to 0.8
  • lower “D Term Filter Multiplier” to 0.8
  • setup a Notch filter at 122Hz (cutoff 100Hz)
  • setup another Noth filter at 153 Hz (cutoff 125Hz)

I strongly suggest you use a blackbox to analyze your first flights and make sure there are no vibrations in the motor outputs.

Once you've done that, the drone will fly really nicely!

This FPV drone frame is designed to hold this gear:

You'll also need:

Tags