1 / 5
CANOPY - BetaFPV Meteor75 Pro Runcam TBS nano 32 VTX - CANOPY — zdjęcie 1
1 / 5

CANOPY - BetaFPV Meteor75 Pro Runcam TBS nano 32 VTX - CANOPY

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Canopy to fit a runcam racer nano 2 with a TBS nano 32 VTX onto a Meteor75 Pro Frame 5.xish grams. no supports.

Ocena
5 / 5
Polubienia
40
Pobrania
444
Wydruki
1
Wyświetlenia
3642
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I designed a canopy to fit a Runcam and TBS nano VTX onto my Meteor75 Pro Frame.

It closes with the help of 1-2 Zippies, velcro cable ties or glue or string or anything else.

==> NO ZIP-TIES ON PREVIEW PICTURE!!!

 

The VTX antenna is supported by the frame (currently I have a shorter one installed).

The VTX is held in place by the top half of the canopy OR a zippy-tie. => you could leave the top half away and spare some grams.

 

 

It prints: WITHOUT SUPPORTS but with a small skirt - see the .3mf for details

Printed in PETG. Variable Layer Height is ON => Adaptive and basic config

 

The STL included is only for preview. Not for print. Use the .3mf instead.

 

Have fun and happy whooping!

Tagi