Counting matching models…
A modular case to easily carry the BetaFPV Meteor75 Pro O4, batteries, and a few spare parts. Prevents squishing the drone when transporting it. Even if the battery holders can work with the standard case, I'd recommend choosing a cut…
I designed a canopy to fit a Runcam and TBS nano VTX onto my Meteor75 Pro Frame. It closes with the help of 1-2 Zippies, velcro cable ties or glue or string or anything else. ==> NO ZIP-TIES ON PREVIEW PICTURE!!! The VTX antenna is…
Alternative Frame for the Meteor75 Pro with 45 mm Propellers The propeller guard is not mounted to the lower frame with screws as usual, but instead secured with rubber bands, as shown in the pictures. The LiPo battery is also held in…
Seems to have fixed my jello issue and is more supportive in a crash avoiding the weak betafpv canopy. Shaved some weight off since it is TPU. Used 2 m1.7x14mm screws. One on each side to mount. I use the spacers to provide some rigidity…
Remix of the frame to get the FC from meteor75 fit under the prop guard with more clearance because of some pins on the board. For the 1s 450mah battery holder, this one fits https://www.thingiverse.com/thing:3448125 Print Settings…
1mm wall thickness Can be printed in PLA or PETG with some overhang artifacts, that noone will ever see 😇 TPU might work as well, but won't be as protective for the lens. Suitable for Foxeer Toothless2 nano (Starlight) camera (14 mm wide,…
Cowboy hat for a little guy. For BetaFPV Meteor75 Pro Analog. Might work with Meteor65, cannot confirm.
Takes M4 nuts and 30~35mm socket head cap screws. This is my first make/remix/post/tinker, so as expected it isn't perfect. There was a slight issue on the bottom of the inside but it was very minor so I was able to use the case anyway.
I printed it in hard tpu the mount can be printed standing supports enabled
TPU recommended for camera mount and PETG or PLA for VTX mount. I used dental brace bands to lock the camera mount system together. 100% infill and full supports.
Optimized fir Meteor75 Pro, 1.5g only. Printet with tpu95a. No supports needed. https://tressym.eu/parts/joker - original designers, check them out!
Montaż wymaga użycia śrubek fi3 dwóch różnych długości, wkładki wewnętrzne mogą wymagać delikatnego doszlifowania (zależy od dokładności druku). Dałem obydwie wkładki na baterie 750 (większe niż zalecane) osobno, żeby ładniej wyszło,…
This is my custom-designed case made specifically for the BetaFPV Meteor75 frame. It securely houses the drone and protects it during transport or storage. The case is held closed using four magnets (6mm diameter, 1.5mm thick). I…
This file contains only the case portion of the model. The lid from the original model should still function. I'm not a wizard with Fusion360, so the magnet holes were also elongated by this change. To circumvent this problem, I added 6x…
🛠 75mm Open-Frame Micro Drone (FDM Optimized) Overview This is a custom 75mm open-frame micro drone frame designed for clean airflow, reduced prop wash, and strong FDM print performance . Unlike traditional ducted whoop frames, this…
THIS SETUP REQUIRES CANOPY MODIFICATION You will need to cut out the canopy as shown in the picture to get this to fit This camera mount is designed to replace the little gummies that come with the original canopy for the Meteor75 and…
This is a mount to fit a Foxeer Micro Lollipop Antenna to the Betaflight Meteor75 frame ( NOT 75 pro! ). Just print it in TPU (I used 95A TPU from Overture), without supports the slicer might bicker about floating regions, but that's OK.…
Meteor75 Wall Mount for IKEA Skådis A clean, single-piece wall mount for the BetaFPV Meteor75 Pro O4 Tiny Whoop. No more drones rotting in a drawer between cables and accessories — just snap the holder onto your IKEA Skådis pegboard and…
Turn a standard food container into a professional, organized carry case for your BetaFPV Meteor75 Pro ! This modular insert is designed to keep your whoop, power, and charging gear secure and rattle-free while traveling to your favorite…
I designed this lightweight 2.4GHz T-antenna mount after being a bit disappointed in my AIO's built-in receiver performance. Designed to upgrade your Meteor75 Pro frame to an external RP1 receiver at the cost of a couple grams. This mount…
Printed the original and loved it. Bought an affordable 6 pack of fans online that came with the USB. Would have cost triple to make it myself through the same site, not others probably. Anyhow wanted one for the Meteor75 drones I have so…
This file contains only the case portion of the model. The lid from the original model should still function. I'm not a wizard with Fusion360, so the magnet holes were also elongated by this change. To circumvent this problem, I added 6x…
Optimized fir Meteor75 Pro, 1.5g only. Printet with tpu95a. No supports needed. https://tressym.eu/parts/joker - original designers, check them out!
Montaż wymaga użycia śrubek fi3 dwóch różnych długości, wkładki wewnętrzne mogą wymagać delikatnego doszlifowania (zależy od dokładności druku). Dałem obydwie wkładki na baterie 750 (większe niż zalecane) osobno, żeby ładniej wyszło,…
🛠 75mm Open-Frame Micro Drone (FDM Optimized) Overview This is a custom 75mm open-frame micro drone frame designed for clean airflow, reduced prop wash, and strong FDM print performance . Unlike traditional ducted whoop frames, this…
Use velcro cable tie to hold battery in place. This modification (with the battery) adds ~7g compared to the stock batteries. Material: PLA+ Resolution: .2 mm Nozzle: .4 mm Infill: 15% Wall Lines: 3 Supports: Yes - Tree
This case holds a Meteor 75 Pro frame and up to 8 BetaFPV 1S 550mAh batteries. I found it easier to use in my sling bag without the lid for easy access, but the file is included if you want to use it. Printed in PETG, no supports, with…
