1 / 5
BetaFPV Meteor75 Pro O4 Wall Mount for IKEA Skådis Pegboard — image 1
1 / 5

BetaFPV Meteor75 Pro O4 Wall Mount for IKEA Skådis Pegboard

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Single-piece wall mount for the BetaFPV Meteor75 Pro O4 1S Whoop. Fits IKEA Skådis. Holds the drone in any orientation.

Rating
0 / 5
Likes
1
Downloads
5
Makes
0
Views
101
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Meteor75 Wall Mount for IKEA Skådis

A clean, single-piece wall mount for the BetaFPV Meteor75 Pro O4 Tiny Whoop. No more drones rotting in a drawer between cables and accessories — just snap the holder onto your IKEA Skådis pegboard and your whoops sit on the wall, ready to grab and fly.

This is the bigger brother of my Air65 wall mount — same idea, scaled up for the larger 75mm frame, with an extra hook for a more secure hold.

Why this design works

Instead of modeling the exact shape of the drone, the holder uses a rounded rectangular pocket. The reason: the Meteor75 isn't symmetrical because of the battery connector at the back. With an exact-fit design you'd have to insert the drone in one specific orientation every time — and it wouldn't fit at all with the battery attached.

This design solves that. The drone sits perfectly, but you can drop it in in any orientation — even with the battery mounted. The slightly chunkier body also leaves room on the sides for stickers, and the center hole saves material and print time without sacrificing stability.

Print settings
  • Material: any material works — no special requirements

  • Settings: completely standard / default profile

  • Supports: tree support only for the IKEA hooks on the back

  • Orientation: as oriented in the file

  • Prints as a single piece — no assembly required

Mounting

The integrated L-hooks are designed and tuned for the IKEA Skådis pegboard. This larger version uses three hooks instead of two, so the extra hook keeps it holding rock-solid with no wobble or tilt. Print as many as you need and your wall grows over time.

Left and right versions included — purely cosmetic. The pocket opening faces left on one and right on the other, so you can mix them for a symmetrical look on the wall. Function is identical, pick whichever you like.

Custom backplates

The holder takes a removable backing plate, so you can personalize the look. Three plates are included:

  • a blank version

Want to design your own? Here are the dimensions:

  • Size: 110,2 × 110,s mm

  • Thickness: 0.6 mm

  • Corner radius: 26,6 mm

Tip: print the plate at 0.2 mm layer height or finer for best results — it's a thin part. Drop in your own artwork, text, or sticker design, and if you make one, share it as a remix.

Printing the logo backplates (multicolor)

How to color the logo in Bambu Studio:

  1. Place the plate with the logo facing down (toward the build plate)

  2. Select the model and open the Color Painting tool (shortcut: N)

  3. Choose the Fill mode with edge detection enabled

  4. Click the logo area — it fills the logo with your chosen color automatically

  5. Assign your colors and slice as usual

Video

Short clip of the mount in action:

If you print one, I'd love to see it — share a make!

Tags