Ceiling Rose Canopy Abzweig-Baldachin
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This turned out to be even better and more durable than the ones from the hardware store.
- Rating
- 5 / 5
- Likes
- 67
- Downloads
- 493
- Makes
- 9
- Views
- 1,762
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I am not sure if the name for this part is right... I searched quite a while for the correct translation. But at first I didn't even know the german word.... :D In german it is called "Abzweigbaldachin" so the direct translation should be "branch canopy". It is that part you mount under the ceiling where the cable for your light comes out. I bought one of those at the near hardware store and thought it is much too expensive for such a cheap part. So as I needed one more I decided to nearly copy the part I already had by taking measurements and doing a little reverse engineering. It is quite easy to print and I designed it to be a little more robust.
The part has holes for screws and cables and a twistlock mechanism similar to the original. The base needs SUPPORTS for printing.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
20%
Filament: DasFilament PLA white
Notes:
For the cap you dont need supports. The bottom part has a little ring that is higher than the rest of the surface facing the ceiling. This should prevent forming a gap between the part and the ceiling but needs a support area for printing.
I used PLA from DasFilament.