Ceiling Rose Canopy Abzweig-Baldachin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This turned out to be even better and more durable than the ones from the hardware store.
- Ocena
- 5 / 5
- Polubienia
- 67
- Pobrania
- 493
- Wydruki
- 9
- Wyświetlenia
- 1762
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I am not sure if the name for this part is right... I searched quite a while for the correct translation. But at first I didn't even know the german word.... :D In german it is called "Abzweigbaldachin" so the direct translation should be "branch canopy". It is that part you mount under the ceiling where the cable for your light comes out. I bought one of those at the near hardware store and thought it is much too expensive for such a cheap part. So as I needed one more I decided to nearly copy the part I already had by taking measurements and doing a little reverse engineering. It is quite easy to print and I designed it to be a little more robust.
The part has holes for screws and cables and a twistlock mechanism similar to the original. The base needs SUPPORTS for printing.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
20%
Filament: DasFilament PLA white
Notes:
For the cap you dont need supports. The bottom part has a little ring that is higher than the rest of the surface facing the ceiling. This should prevent forming a gap between the part and the ceiling but needs a support area for printing.
I used PLA from DasFilament.