Ratrig V-Minion 1.1 bottomside corner plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The 1.1 design doesn't use the same connector plate on the underside as 1.0, so people will need to produce their own.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 88
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The 1.0 design uses a T-shaped plate to connect the Y-axis rail to the printer, but with the 1.1 version you use some of that space for the MCU electronics box. Out of the CAD, I extracted the profile needed to make this corner style plate.
I used that to laser cut the 8mm acrylic plate you see in the picture. The blue part is the stock 1.1 electronics box for the SKRat. This plate is the bottom orange piece.
Probably I don't need to publish any 3D versions of this because you can just directly extract this from the CAD.
Also, I just saw that someone also modified the 1.1 electronics box to be compatible with the 1.1 T-plate.
https://www.printables.com/model/1185924-ratrig-v-minion-11-mods