Dual charger carry solution for OneWheel GT
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have enough to carry
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 90
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
These are the printable pieces to accommodate two OneWheel GT chargers in one box. Only the box needs modification (side holes drilled and IEC jack).
Features…
- Space for two GT home chargers
- Cooling channels around the chargers
- 40mm fan to draw out hot air
- Wireless phone charger
- USB charger in the lid
- Single IEC cable stores within the box
I used 3 right-angle cords (cut off the US outlet end) and soldered them to wires extending from the IEC jack mounted on the side of the box. Box must remain open for proper airflow (and cords to exit) while chargers are operating.
Actual box used is one of the Greenmade Store-All Storage Crate from Costco or Amazon
This is not a Onewheel or Future Motion branded product, nor is the publisher/distributor affiliated with Onewheel or Future Motion in any way. Onewheel is a registered trademark of Future Motion. The use of Onewheel here is for identification of manufacturer compatible products and does not imply any affiliation or endorsement by the Onewheel brand owner.