Neptune 4 Series Speed Test & XY Motion Stability G-code (No Print, Just Run)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ready-to-run G-code to test XY motion stability and speed on Neptune 4/Pro/Plus/Max after belt tuning.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 125
- Wydruki
- 0
- Wyświetlenia
- 585
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Share Alike
This is a precompiled G-code file designed for motion stability testing on Elegoo Neptune 4 /Pro/ Plus / Max printers.
There is no need to slice anything — simply copy the appropriate file to your printer’s SD card and run it directly.
🔧 What It Does:
Moves the print head in square and diagonal XY loops.
Performs rapid oscillating X/Y movements around the bed center.
Includes 15 cycles of oscillation to test belt tension and backlash.
The printer homes twice (at the beginning) to ensure the belts are not catching or skipping.
✅ Safety Features:
Oscillation amplitude is only ±5mm from center — well within safe bounds.
Speeds are set to 480 mm/s, which is close to the max of 500 mm/s that the machine firmware allows.
Acceleration, jerk, and feedrate values are safe and will not harm your printer.
500 mm/s is possible but not recommended unless you're confident in your belt tension and have tested it carefully — higher speeds may result in skipped steps.
🛠 Recommended Use:
Run this file after tuning or tightening your belts to verify stability.
If your belts are too loose, you'll see wobble or stuttering; if they're too tight, you might hear skipping or cause long-term wear.
This test helps detect such issues without wasting filament or time.