3D Printable Multibin Speaker Works with Multiboard Environment
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A custom multi-bin converted to work as a speaker enclosure.
- Ocena
- 5 / 5
- Polubienia
- 268
- Pobrania
- 351
- Wydruki
- 1
- Wyświetlenia
- 4686
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
This is a speaker enclosure designed to work with the multi-board environment, meaning it will attach to your walls and add spaces for additional bins to attach to it.
BOM:
2 - https://s.click.aliexpress.com/e/_oB0EJqW 15-60w 3 inch loudpseakers*
1 - https://s.click.aliexpress.com/e/_olIYq0A 52mm 15-20W Ultrathin Tweeter*
2 - 400W Speakers Filter Frequency Divider Treble Bass 2 Ways Audio Speaker Crossover High Power 3200Hz for Stage Speaker Upgrade - AliExpress 44 - or similar 3200 hz crossover
1 - https://s.click.aliexpress.com/e/_okqS36E 2 x 50w bluetooth amplifier.
12 - m3 x 6
4 - m3 x 12
4- m3 nuts
12 - m3 heat set inserts
2- m5 x 12
2- m5 heat set inserts
Bluetak or similar sealing material
*Bolts can be found here to purchase all at once : https://s.click.aliexpress.com/e/_omc6KRy
*Heat set inserts here - https://s.click.aliexpress.com/e/_oDEjowa
Instructions:
Print box & lid with max walls for solid infill
The port needs to bolt in and be sealed to the box - all other holes are to be heat set inserted.
Face plate can be glued or blutaked in place.
drill 2 5mm holes on the side of box you're not using for attachments for m5 bolts to pass through to attach speaker wire to. (Johnathan from The Next layer used a single barrel plug connector for this.)
*These are affiliate links that help fund the continuation of free STLs on my page. using them is greatly appreciated.
Video Link: