1 / 1
Acerbis Endurance-X Handguards Spacer F / Yamaha Tenere 700 — zdjęcie 1

Acerbis Endurance-X Handguards Spacer F / Yamaha Tenere 700

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The standard spacer is garbage and will damage the powder coating on your handebar (and I dropped and lost one).

Ocena
0 / 5
Polubienia
3
Pobrania
12
Wydruki
0
Wyświetlenia
298
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The standard spacer is garbage and will damage the powder coating on your handebar (and I dropped and lost one).
 

Heres one that wont!

Printed in TPU laying flat, this one can be easyli installed and works just as well.

It does fit on the Tenere 700. 

But might on other motorcycles too, if:

Install everything else and see where the clamping block wants to sit on your bar. 

Measure the diameter right next to it, if its 25 & 26mm, it will fit.

If its not that, but still 1mm difference between the two measurements, itll work. But you might have to trim it to length.

Tagi